1131990 MOTOR GP-PISTON Caterpillar parts
939C, D4C III, D5C III
Rating:
Alternative (cross code) number:
CA1131990
113-1990
1131990
CA1131990
113-1990
1131990
Weight: 99 pounds 44 kg.
TRACK LOADER, TRACK-TYPE TRACTOR,
Related part:
1131990
MOTOR GP-HYD
0R0901
R
You can buy:
Compatible equipment models: 1131990:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: If the electronic control module (ECM) is being replaced, download the personality module before you remove the ECM. Refer to Troubleshooting, "Replacing the ECM".
Disconnect the negative battery terminal at the battery.
Illustration 1 g01118581
Loosen allen head screw (3) and disconnect the harness assemblies from electronic control module (2).
Disconnect ground strap (6).
Remove bolts (1). Remove electronic control module (2).
If necessary, remove bolts (4) and bracket (5). Remove gasket (7). Installation Procedure
Illustration 2 g01118581
Install gasket (7) and bracket (5). Install bolts (4).
Position electronic control module (2) and install bolts (1).
Connect ground strap (6) and tighten to a torque of 2.50 0.25 N m (22 2 lb in).
Connect the harness assemblies to the electronic control module and tighten allen head screw (3) to a torque of 6 1 N m (53 9 lb in).
Connect the negative battery terminal at the battery.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: If the electronic control module (ECM) is being replaced, download the personality module before you remove the ECM. Refer to Troubleshooting, "Replacing the ECM".
Disconnect the negative battery terminal at the battery.
Illustration 1 g01118581
Loosen allen head screw (3) and disconnect the harness assemblies from electronic control module (2).
Disconnect ground strap (6).
Remove bolts (1). Remove electronic control module (2).
If necessary, remove bolts (4) and bracket (5). Remove gasket (7). Installation Procedure
Illustration 2 g01118581
Install gasket (7) and bracket (5). Install bolts (4).
Position electronic control module (2) and install bolts (1).
Connect ground strap (6) and tighten to a torque of 2.50 0.25 N m (22 2 lb in).
Connect the harness assemblies to the electronic control module and tighten allen head screw (3) to a torque of 6 1 N m (53 9 lb in).
Connect the negative battery terminal at the battery.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D4C & D4C LGP, XL Series III Hystat Tractors 4LS00001-UP (MACHINE) POWERED BY 3046 Engine »
113-1990
MOTOR GP-PISTON
D5C & D5C LGP, XL Series III Hystat Tractors 5HS00001-UP (MACHINE) POWERED BY 3046 Engine »
113-1990
MOTOR GP-PISTON
939C Track Loader Hydrostatic Drive 6DS00001-UP (MACHINE) POWERED BY 3046 Engine »
113-1990
MOTOR GP-PISTON
Caterpillar parts catalog:
Parts motor Caterpillar catalog:
416B, 416C, 426C, 428B, 428C, 436C, 438C, 446B, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 928G, 933, 933C, 939, 939C, 95E, D3C III, D4C III, D5C III
1741496
MOTOR GP-ELECTRIC
933, 933C, 939, 939C, D3C III, D4C III, D5C III
933, 933C, 939, 939C, D3C III, D4C III, D5C III
1094526
MOTOR AS-WINDOW WIPER
933, 933C, 939, 939C, D3C III, D4C III, D5C III
933, 933C, 939, 939C, D3C III, D4C III, D5C III
5E8254
MOTOR GP
CB-434
CB-434
3202395
MOTOR GP-TRAVEL
2590, 522B, 541, 541 2
2590, 522B, 541, 541 2
3044244
MOTOR GP-WINDOW WIPER
D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP
D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP
1592770
MOTOR GP-PISTON
AP-1055B, BG-2455C
AP-1055B, BG-2455C
824K, 825K, 826K, 834K, 836K, 950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, 988K, IT62G II, IT62H
1373722
MOTOR GP-PISTON
318B, 320B, 320B FM LL, 320C, 320C FM, 322B L, 322B LN, 322C, 325 L, 325B L, 330B L, OEMS
318B, 320B, 320B FM LL, 320C, 320C FM, 322B L, 322B LN, 322C, 325 L, 325B L, 330B L, OEMS
3751643
MOTOR GP-PISTON
2864C, 586C
2864C, 586C
0980213
MOTOR
CB-614
CB-614