MOTOR AS-WINDOW WIPER 1171882 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Place identification marks on the lifter assembly for installation.
Illustration 1 g01109091
Remove bolts (1) and lifter assembly (2) .
Illustration 2 g01109092
Remove the following items from lifter shaft (3) : bracket assemblies (4), valve lifters (5) and unit injector lifters (6) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01109092
Lubricate the lifter shaft with clean engine oil prior to assembly.
Install the following items on lifter shaft (3) : bracket assemblies (4), valve lifters (5) and unit injector lifters (6) .
Illustration 4 g01109091
Note: Immerse the entire lifter assembly in clean engine oil prior to installation on the engine.
Place lifter assembly (2) on the engine and install bolts (1). Tighten the bolts to a torque of 30 3 N m (22 2 lb ft).End By: Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".