1438434 MOTOR GP- Caterpillar parts
Rating:
Alternative (cross code) number:
CA1438434
143-8434
1438434
CA1438434
143-8434
1438434
Weight: 50 pounds 22 kg.
Cross Reference:
ACDelco
10461085,
10461153,
10461395,
10461417,
10478815,
10478961,
10479013,
10479172,
1993995,
41MTDD,
CATERPILLAR
0R2735,
0R4263,
1068559,
1438434,
2071517,
3E2298,
8C4773,
9X9995,
9Y1945,
DELCO REMY
10461085,
10461153,
10461395,
10461417,
10478815,
10478961,
10479013,
10479172,
1993995,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
OEG Parts New Starter Compatible with Caterpillar 322c FM LGP 322C Forest 322CL 322CLN 1438434 207-1511 207-1517 3E2298 6V5720 8C4773 9X9995 9Y1945, SDR0141, 41012196, 41012196R, 41012488, SDR0142
Parts Player Replacement Part Numbers: 0R2735, SDR0142, SDR0141, 9Y1945, 9X9995, 8C4773, 6V5720, 6800, 6666, 6634, 6633N, 6633, 410-12488, 41012488, 410-12215, 41012215, 410-12196R, 41012196R, 410-12196, 41012196, 3E2298, 3921403, 3675209RX, 323-951, 323951, 323-881, 323881, 207-1517, 2071517, 207-1511, 2071511, 1993995, 1438434, 10R-0395, 10R0395, 106-8559, 1068559, 106-8558, 1068558, 106-8557, 1068557, 10479275, 10479221, 10479172, 10479013, 10478961, 10478925, 10478817, 10478815, 104-7040, 1047040 || Condition: New; Unit Type: DD; Unit Series: 41MT; Voltage: 24V; Rotation: CW; Tooth Count: 12; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Solenoid Positioned At 308 Degrees || See Product Description for Fitment Chart || Additional Part Numbers: 10461417, 10461395, 10461239, 10461153, 10461085, 0R4263
Parts Player Replacement Part Numbers: 0R2735, SDR0142, SDR0141, 9Y1945, 9X9995, 8C4773, 6V5720, 6800, 6666, 6634, 6633N, 6633, 410-12488, 41012488, 410-12215, 41012215, 410-12196R, 41012196R, 410-12196, 41012196, 3E2298, 3921403, 3675209RX, 323-951, 323951, 323-881, 323881, 207-1517, 2071517, 207-1511, 2071511, 1993995, 1438434, 10R-0395, 10R0395, 106-8559, 1068559, 106-8558, 1068558, 106-8557, 1068557, 10479275, 10479221, 10479172, 10479013, 10478961, 10478925, 10478817, 10478815, 104-7040, 1047040 || Condition: New; Unit Type: DD; Unit Series: 41MT; Voltage: 24V; Rotation: CW; Tooth Count: 12; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Solenoid Positioned At 308 Degrees || See Product Description for Fitment Chart || Additional Part Numbers: 10461417, 10461395, 10461239, 10461153, 10461085, 0R4263
OEG Parts New Starter Compatible with Caterpillar 322c FM LGP 322C Forest 322CL 322CLN 1438434 207-1511 207-1517 3E2298 6V5720 8C4773 9X9995 9Y1945, SDR0141, 41012196, 41012196R, 41012488, SDR0142
Parts Player Replacement Part Numbers: 0R2735, SDR0142, SDR0141, 9Y1945, 9X9995, 8C4773, 6V5720, 6800, 6666, 6634, 6633N, 6633, 410-12488, 41012488, 410-12215, 41012215, 410-12196R, 41012196R, 410-12196, 41012196, 3E2298, 3921403, 3675209RX, 323-951, 323951, 323-881, 323881, 207-1517, 2071517, 207-1511, 2071511, 1993995, 1438434, 10R-0395, 10R0395, 106-8559, 1068559, 106-8558, 1068558, 106-8557, 1068557, 10479275, 10479221, 10479172, 10479013, 10478961, 10478925, 10478817, 10478815, 104-7040, 1047040 || Condition: New; Unit Type: DD; Unit Series: 41MT; Voltage: 24V; Rotation: CW; Tooth Count: 12; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Solenoid Positioned At 308 Degrees || See Product Description for Fitment Chart || Additional Part Numbers: 10461417, 10461395, 10461239, 10461153, 10461085, 0R4263
Parts Player Replacement Part Numbers: 0R2735, SDR0142, SDR0141, 9Y1945, 9X9995, 8C4773, 6V5720, 6800, 6666, 6634, 6633N, 6633, 410-12488, 41012488, 410-12215, 41012215, 410-12196R, 41012196R, 410-12196, 41012196, 3E2298, 3921403, 3675209RX, 323-951, 323951, 323-881, 323881, 207-1517, 2071517, 207-1511, 2071511, 1993995, 1438434, 10R-0395, 10R0395, 106-8559, 1068559, 106-8558, 1068558, 106-8557, 1068557, 10479275, 10479221, 10479172, 10479013, 10478961, 10478925, 10478817, 10478815, 104-7040, 1047040 || Condition: New; Unit Type: DD; Unit Series: 41MT; Voltage: 24V; Rotation: CW; Tooth Count: 12; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Solenoid Positioned At 308 Degrees || See Product Description for Fitment Chart || Additional Part Numbers: 10461417, 10461395, 10461239, 10461153, 10461085, 0R4263
OEG Parts New Starter Compatible with Caterpillar 322c FM LGP 322C Forest 322CL 322CLN 1438434 207-1511 207-1517 3E2298 6V5720 8C4773 9X9995 9Y1945, SDR0141, 41012196, 41012196R, 41012488, SDR0142
Parts Player Replacement Part Numbers: 0R2735, SDR0142, SDR0141, 9Y1945, 9X9995, 8C4773, 6V5720, 6800, 6666, 6634, 6633N, 6633, 410-12488, 41012488, 410-12215, 41012215, 410-12196R, 41012196R, 410-12196, 41012196, 3E2298, 3921403, 3675209RX, 323-951, 323951, 323-881, 323881, 207-1517, 2071517, 207-1511, 2071511, 1993995, 1438434, 10R-0395, 10R0395, 106-8559, 1068559, 106-8558, 1068558, 106-8557, 1068557, 10479275, 10479221, 10479172, 10479013, 10478961, 10478925, 10478817, 10478815, 104-7040, 1047040 || Condition: New; Unit Type: DD; Unit Series: 41MT; Voltage: 24V; Rotation: CW; Tooth Count: 12; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Solenoid Positioned At 308 Degrees || See Product Description for Fitment Chart || Additional Part Numbers: 10461417, 10461395, 10461239, 10461153, 10461085, 0R4263
Parts Player Replacement Part Numbers: 0R2735, SDR0142, SDR0141, 9Y1945, 9X9995, 8C4773, 6V5720, 6800, 6666, 6634, 6633N, 6633, 410-12488, 41012488, 410-12215, 41012215, 410-12196R, 41012196R, 410-12196, 41012196, 3E2298, 3921403, 3675209RX, 323-951, 323951, 323-881, 323881, 207-1517, 2071517, 207-1511, 2071511, 1993995, 1438434, 10R-0395, 10R0395, 106-8559, 1068559, 106-8558, 1068558, 106-8557, 1068557, 10479275, 10479221, 10479172, 10479013, 10478961, 10478925, 10478817, 10478815, 104-7040, 1047040 || Condition: New; Unit Type: DD; Unit Series: 41MT; Voltage: 24V; Rotation: CW; Tooth Count: 12; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Solenoid Positioned At 308 Degrees || See Product Description for Fitment Chart || Additional Part Numbers: 10461417, 10461395, 10461239, 10461153, 10461085, 0R4263
For full view, you need register
Information:
Use this procedure if the digital throttle position sensor is suspected of incorrect operation. This procedure also covers the following diagnostic codes:
Table 1
Diagnostic Trouble Codes for the Digital Throttles
J1939 Code CDL Code Code Description
(code descriptions may vary) Comments
29-3 774-3 Accelerator Pedal Position 2 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-4 774-4 Accelerator Pedal Position 2 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-8 774-8 Accelerator Pedal Position 2 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 29-3, 774-3, 29-4, and 774-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
91-3 91-3 Accelerator Pedal Position 1 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-4 91-4 Accelerator Pedal Position 1 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-8 91-8 Accelerator Pedal Position 1 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 91-3 and 91-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
Follow the troubleshooting procedure in order to identify the root cause of the fault. If a fault occurs with the primary throttle, the
Table 1
Diagnostic Trouble Codes for the Digital Throttles
J1939 Code CDL Code Code Description
(code descriptions may vary) Comments
29-3 774-3 Accelerator Pedal Position 2 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-4 774-4 Accelerator Pedal Position 2 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-8 774-8 Accelerator Pedal Position 2 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 29-3, 774-3, 29-4, and 774-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
91-3 91-3 Accelerator Pedal Position 1 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-4 91-4 Accelerator Pedal Position 1 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-8 91-8 Accelerator Pedal Position 1 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 91-3 and 91-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
Follow the troubleshooting procedure in order to identify the root cause of the fault. If a fault occurs with the primary throttle, the
Parts motor Caterpillar catalog:
1437964
MOTOR GP-MTG&
Caterpillar
Caterpillar
1437962
MOTOR GP-MTG&
Caterpillar
Caterpillar
1435230
MOTOR GP-
Caterpillar
Caterpillar
1431324
MOTOR
Caterpillar
Caterpillar
Caterpillar
Caterpillar
1477974
MOTOR GP-
Caterpillar
Caterpillar
1477886
MOTOR-ELECTRIC
Caterpillar
Caterpillar
1477324
MOTOR GP-PS-F-
Caterpillar
Caterpillar
1465495
MOTOR G
Caterpillar
Caterpillar
1463505
MOTOR GP-
Caterpillar
Caterpillar
1444149
MOTOR GP-WIPER
Caterpillar
Caterpillar