MOTOR GP-SWING 1639758 - Caterpillar

2. Disconnect gauge line (2) for the water pressure from the radiator.3. Disconnect inlet elbow (1) from the radiator.4. Remove the clip that holds the wires for the alternator to the guard for the radiator.5. Loosen the clamps for the hose between the outlet elbow for the radiator and the water pump elbow. Slide the hose down on the outlet elbow. 6. Disconnect outlet lines (5) from tube (4).7. Remove the bolts that hold the fan guard (3) to the radiator. Move the fan guard to the side until the bolts that hold the fan to the fan drive can be removed. Remove the bolts that hold the fan in position. Put the fan against the radiator.
Do not cause damage to the radiator when the fan is put against it.
8. Fasten a hoist to the radiator and guard. Remove the bolts and washers that hold the guard to the frame. Remove the radiator and guard as a unit. Weight of the unit is 3600 lb. (1633 kg).Install Radiator And Guard
1. Fasten a hoist to the radiator and guard (1). Put the unit in position on the frame. Install the bolts and washers that hold it.2. Put the fan in position on the fan drive. Install the bolts that hold it.3. Connect the hydraulic lines to the tubes for the cylinders.4. Install the elbow between the water pump and the radiator.5. Install the clip that holds the wires for the alternator.6. Connect the inlet elbow to the radiator.7. Connect the water pressure line to the radiator.8. Fill the radiator with coolant to the correct level. See LUBRICATION AND MAINTENANCE GUIDE.end by:a) install crankcase guards (front)b) install hood