MOTOR AS 1704008 - Caterpillar

Table 3
Rated Load ( IT62G Buckets)    
Part Number (Bucket)     Ground Engaging Tools     Rated Volume     Rated Operating Load     Dump Clearance
A     Reach
B    
111-5742     Material Handler    
3.7 m3 (4.8 yd3)    
5610 kg (12368 lb)    
2840 mm (112 inch)    
1240 mm (48.8 inch)    Rated Load for the Pallet Fork
Illustration 2 g00986865
The clearance and the reach are given for each implement at the maximum lift height. Clearance (C) is measured from the ground to the bottom edge of the implement. Reach (D) is measured from the front of the front tire to the front vertical edge of the implement.The following table provides the rated operating loads for the standard machine (North American configuration).
Table 4
Rated Load ( IT62G Pallet Fork)    
Part Number (Pallet Fork)     115-7448    
Maximum Clearance
C    
3790 mm (149 inch)    
Full Reach
D    
1117 mm (44 inch)    
Overall Length With Fork on Ground    
8755 mm (345 inch)    
Maximum Load    
4141 kg (9129 lb)    Reference: Refer to Special Publication, GELQ0149, "Wheel Loader Fork Application Guide" for the rated loads of other machine configurations.Rated Load for the Logging Fork
Illustration 3 g00986872
The following table provides the rated operating load for the standard machine configuration with a logging fork.
Table 5
Rated Load ( IT62G Logging Fork)    
Operating Load    
5990 kg (13205 lb)    
Load Carrying Capacity
E    
2.4 m2 (2.88 yd2)    
Maximum Height for Unloading
F    
4450 mm (175 inch)    
Maximum Opening
G    
2820 mm (111 inch)    Rated Load for the Material Handling Arm
Illustration 4 g00986890
The placement height is measured from the ground to the chain hook. The reach is measured from the center of the front tire to the chain hook. These measurements are given for a material handling arm that is at highest position (1) and at lowest position (2). The operating load is given for a machine that is articulated by 40 degrees.The following table provides the rated operating loads for the standard machine configuration with a material handling arm.
Table 6
Rated Load ( IT62G Material Handling Arm)    
Length of Material Handling Arm    Rated Operating Load    Placement Height at Highest Position    Reach at Highest Position    Placement Height at Lowest Position    Reach at Lowest Position    
Retracted
H    
3085 kg (6801 lb)    
5775 mm (227 inch)    
2545 mm (100 inch)    
1485 mm (58.5 inch)    
2720 mm (107 inch)    
Mid-Position
I    
2626 kg (5789 lb)    
6340 mm (250 inch)    
3110 mm (122 inch)    
1970 mm (77.6 inch)    
3355 mm (132 inch)    
Extended
J    
2288 kg (5044 lb)    
6910 mm (272 inch)    
3670 mm (144 inch)    
2460 mm (96.8 inch)    
3987 mm (157 inch)