MOTOR GP-GEROTOR 1914730 - Caterpillar

2. Disconnect gauge line (5) from the top tank.3. Disconnect inlet elbow (2) from the top tank.4. Remove bolts (1) and cover (3).5. Remove bolts (4) that hold the top tank to the rear shield. 6. Remove the two bolts that hold the grille plate (6) in position. Open the grille plate as shown.7. Remove four brackets (8) that hold the radiator to the side guards.8. Remove two baffles (7) from each side of the radiator. 9. Disconnect outlet elbow (9) from the bottom tank.10. Install two 3/8" - 16 NC forged eyebolts in the sides of the radiator. Fasten a hoist to the radiator as shown.
Do not put pressure on the sides of the radiator.
11. Remove the radiator from the radiator guard. Weight of the radiator is 650 lb. (295 kg).Install Radiator
1. Fasten a hoist to the radiator.2. Put the radiator in position in the radiator guard.3. Install the two baffles on each side of the radiator guard.4. Install the four brackets that hold the radiator to the side guards.5. Put the front grille plate in position and install the two bolts that hold it.6. Connect the outlet elbow to the bottom tank. 7. Install bolts (4) that hold the top tank to the rear shield.8. Put cover (3) in position on the side guards and install bolts (1) that hold it.9. Connect inlet tube (2) to the top tank.10. Connect gauge line (5) to the top tank.11. Fill the cooling system with coolant to the correct level. See LUBRICATION AND MAINTENANCE GUIDE.end by:a) install crankcase guard (front)b) install hood