MOTOR GP-GEAR 1927742 - Caterpillar

Illustration 1 g02731947
Top view
Table 1
Specification for 346-7307 Excavator Pin Gp
Item Qty Part Specification Description
Before assembly, use black 5P-0960 Grease Cartridge in order to coat all the pin bores.
1 1 343-9295 Pin As Thickness is 89.850 0.025 mm (3.5374 0.0010 inch).
2 As required, use the following shims in order to adjust the maximum lateral clearance of 1.6 mm (0.06 inch). Mount steel shim to be located at frame side:
1 308-8775 Shim Thickness is 0.5 mm (0.02 inch).
2 308-8776 Shim Thickness is 1.0 mm (0.04 inch).
1 308-8777 Shim Thickness is 2.0 mm (0.08 inch).
A - - Clearance between the pin end and the side of the cab must be kept over 10.0 mm (0.39 inch).
3 As required, use the following shims in order to adjust the lateral clearance to 1.0 mm (0.04 inch):
2 133-2425 Shim Thickness is 0.5 mm (0.02 inch).
4 093-0083 Shim Thickness is 1.0 mm (0.04 inch).
2 093-0115 Shim Thickness is 2.0 mm (0.08 inch).
4 2 154-0480 Pin As Thickness is 79.850 0.025 mm (3.1437 0.0010 inch).