1C7064 MOTOR GP-PISTON Caterpillar parts
OEMS
Rating:
Alternative (cross code) number:
CA1C7064
1C-7064
1C7064
CA1C7064
1C-7064
1C7064
Weight: 103 pounds 46 kg.
UNDERCARRIAGE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
FLOVENTIS 2Pcs Cab Sleeper Air Spring Bags for Kenworth T680 Aerocab(Mid 1999 and Earlier) Trucks OEM Replaces W02-358-7064, 1S5-157 Cab Air Ride Suspension Spring Bags (1C7064 x 2)
FLOVENTIS 【High Quality Assurance】Made of rugged rubber material and iron, cab sleeper air spring bags provide consistent performance and a more consistent wear surface. || 【Vehicle Compatibility】FLOVENTIS cab sleeper air spring bags fit for KENWORTH T680 AEROCAB(MID 1999 AND EARLIER) Trucks. || 【Reference Part Number】For Firestone W02-358-7064, LINK 1102-0074, TRIANGLE AS-5064, TRP AS70640, DATON 453-7064, PETERBILT 579. (If you are not sure of your part number, call your dealer for the part number. Then, check to see if this air spring bag can replace it.) || 【Direct Replacement 】Our air ride spring bags are the same as the original, direct in-situ replacement of the original one without any modification. || 【Excellent After-Sales Service】At FLOVENTIS, customer satisfaction is our top priority. Rest assured that we stand behind our products with unwavering confidence. If you have any questions or concerns, our dedicated support team is here to assist you every step of the way.
FLOVENTIS 【High Quality Assurance】Made of rugged rubber material and iron, cab sleeper air spring bags provide consistent performance and a more consistent wear surface. || 【Vehicle Compatibility】FLOVENTIS cab sleeper air spring bags fit for KENWORTH T680 AEROCAB(MID 1999 AND EARLIER) Trucks. || 【Reference Part Number】For Firestone W02-358-7064, LINK 1102-0074, TRIANGLE AS-5064, TRP AS70640, DATON 453-7064, PETERBILT 579. (If you are not sure of your part number, call your dealer for the part number. Then, check to see if this air spring bag can replace it.) || 【Direct Replacement 】Our air ride spring bags are the same as the original, direct in-situ replacement of the original one without any modification. || 【Excellent After-Sales Service】At FLOVENTIS, customer satisfaction is our top priority. Rest assured that we stand behind our products with unwavering confidence. If you have any questions or concerns, our dedicated support team is here to assist you every step of the way.
For full view, you need register
Compatible equipment models: 1C7064:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 367-3534 Oil Seal Removal & Installer Tool 1 Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01989793
Position Tooling (A) onto crankshaft front seal (2).
Turn Tooling (A) in a counterclockwise direction and remove crankshaft front seal (2) from front cover (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 367-3534 Oil Seal Removal & Installer Tool 1
B - Loctite 5900 -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the front cover is clean and free from damage.
Illustration 2 g02460059
Illustration 3 g01990013
Apply a 3 mm (0.1181 inch) continuous bead of Tooling (B) to the seal face in Position (Y).
Correctly position a new crankshaft front seal (2) in Position (X) onto front cover (1).
Position Tooling (A) onto crankshaft front seal (2).
Use Tooling (A) in order to turn crankshaft front seal (2) in clockwise direction.
If it is necessary to apply a torque greater than 50 N m (37 lb ft) in order to install crankshaft front seal (2), remove crankshaft front seal (2). Inspect the crankshaft front seal and the front cover for faults or damage.
If necessary repeat Step 2 through Step 5in order to install crankshaft front seal (2). End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 367-3534 Oil Seal Removal & Installer Tool 1 Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01989793
Position Tooling (A) onto crankshaft front seal (2).
Turn Tooling (A) in a counterclockwise direction and remove crankshaft front seal (2) from front cover (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 367-3534 Oil Seal Removal & Installer Tool 1
B - Loctite 5900 -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the front cover is clean and free from damage.
Illustration 2 g02460059
Illustration 3 g01990013
Apply a 3 mm (0.1181 inch) continuous bead of Tooling (B) to the seal face in Position (Y).
Correctly position a new crankshaft front seal (2) in Position (X) onto front cover (1).
Position Tooling (A) onto crankshaft front seal (2).
Use Tooling (A) in order to turn crankshaft front seal (2) in clockwise direction.
If it is necessary to apply a torque greater than 50 N m (37 lb ft) in order to install crankshaft front seal (2), remove crankshaft front seal (2). Inspect the crankshaft front seal and the front cover for faults or damage.
If necessary repeat Step 2 through Step 5in order to install crankshaft front seal (2). End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Install" for the correct procedure.
Caterpillar parts catalog:
Parts motor Caterpillar catalog:
1874127
MOTOR GP-PISTON
322B L, 322C, 324D FM, 325B L, OEMS
322B L, 322C, 324D FM, 325B L, OEMS
1140484
MOTOR & MTG GP-TRAVEL
318B, 318C, 319D L, 320B, 320C, 320D, 320D LRR, 322 FM L, 322B L, 322B LN, 322C, 325 L, 325B L, 330B L, OEMS
318B, 318C, 319D L, 320B, 320C, 320D, 320D LRR, 322 FM L, 322B L, 322B LN, 322C, 325 L, 325B L, 330B L, OEMS
7Y4260
MOTOR GP-PISTON
320 L, 322 FM L, 325, 325 L, 325 LN, OEMS
320 L, 322 FM L, 325, 325 L, 325 LN, OEMS
7Y4238
MOTOR GP-PISTON
322 FM L, 325 FM L, 325 L, 330, 330 FM L, 330 L, OEMS
322 FM L, 325 FM L, 325 L, 330, 330 FM L, 330 L, OEMS
2095969
MOTOR GP-PISTON
320C, 322B L, 322C, 322C FM, 325B L, 325C, 325D, 330B L, OEMS
320C, 322B L, 322C, 322C FM, 325B L, 325C, 325D, 330B L, OEMS
0874826
MOTOR & MTG GP-TRAVEL
320, 320 L, 320N, 322, 322 FM L, 322 LN, OEMS
320, 320 L, 320N, 322, 322 FM L, 322 LN, OEMS
