2081145 MOTOR GP-TRAVEL Caterpillar parts
304
Rating:
Alternative (cross code) number:
CA2081145
208-1145
2081145
CA2081145
208-1145
2081145
Weight: 123 pounds 55 kg.
MINI HYD EXCAVATOR,
You can buy:
US$1,923.70
29 Sep 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DoraKvi Final Drive Travel Motor 208-1145 199-5148 Compatible with CAT 304 304.5 304C 304CR
DoraKvi ???? Part Name : Final Drive Travel Motor || ???? Part Number : 208-1145 199-5148 2081145 1995148 || ???? Application : Compatible with CAT 304 304.5 304C 304CR || ✅ Accurate ✅- In Order To Avoid Unnecessary Return. Please follow the old part number and machine model to find the right product, if you are not sure, please contact us, we are more than happy to provide services. || ???? Reliable performance ????-DoraKvi- our products have been carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
DoraKvi ???? Part Name : Final Drive Travel Motor || ???? Part Number : 208-1145 199-5148 2081145 1995148 || ???? Application : Compatible with CAT 304 304.5 304C 304CR || ✅ Accurate ✅- In Order To Avoid Unnecessary Return. Please follow the old part number and machine model to find the right product, if you are not sure, please contact us, we are more than happy to provide services. || ???? Reliable performance ????-DoraKvi- our products have been carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
Solarhome Final Drive Travel Motor 208-1145 199-5148 Compatible with Caterpillar 304 304.5 304C 304CR
Solarhome Product Name: Final Drive Travel Motor || Part Number: 208-1145,199-5148 || Application Models: Compatible With Caterpillar 304 304.5 304C 304CR || Package Include: 1X Final Drive Travel Motor,208-1145
Solarhome Product Name: Final Drive Travel Motor || Part Number: 208-1145,199-5148 || Application Models: Compatible With Caterpillar 304 304.5 304C 304CR || Package Include: 1X Final Drive Travel Motor,208-1145
IMIFAFTAbT 208-1145 2081145 CA2081145 Drive Travel Motor Fits for Caterpillar 304 304.5 304C 304CR Mini Hydraulic Excavator
IMIFAFTAbT Product Name: 208-1145 2081145 CA2081145 Drive Travel Motor || Part number: 208-1145 2081145 CA2081145 || Fits for Caterpillar 304 304.5 304C 304CR Mini Hydraulic Excavator || 1 PCS Drive Travel Motor || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can provide your engine serial number and nameplate
IMIFAFTAbT Product Name: 208-1145 2081145 CA2081145 Drive Travel Motor || Part number: 208-1145 2081145 CA2081145 || Fits for Caterpillar 304 304.5 304C 304CR Mini Hydraulic Excavator || 1 PCS Drive Travel Motor || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can provide your engine serial number and nameplate
This part in 2 request:
Show.
This information for suppliers only!
2020-12-08
2018-03-09
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2081145:
Information:
Removal Procedure
Start By:
Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00804894
Note: This procedure is for engines which have an adapter plate that is installed on the cylinder block. Flywheel housing (2) has a mounting flange (3) for the marine transmission.
Remove the bolts that fasten the flywheel housing to adapter plate (1) . Remove the flywheel housing.If it is necessary to remove adapter plate (1) , perform the following procedure.
Remove the drive coupling. Refer to Disassembly and Assembly, "Drive Coupling - Remove and Install".
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Remove the bolts that fasten adapter plate (1) to the cylinder block. Hit the adapter plate with a soft hammer in order to remove adapter plate (1) from the cylinder block.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00804894
If adapter plate (1) was removed, use the following procedure to install the adapter plate.
Ensure that the rear face of the cylinder block and both sides of adapter plate (1) are clean and free from damage.
Illustration 3 g00804905
Install a new gasket on location pins (4) of the cylinder block. Cut the bottom of the gasket in line with the bottom of housing (5) for the rear oil seal.
Check the alignment of the adapter plate. Refer to Testing and Adjusting, "Flywheel Housing - Adjust".
Install the bolts that fasten the adapter plate to the cylinder block and tighten to a torque of 70 N m (52 lb ft).
Illustration 4 g00804906
Fill space (6) between the bottom of the housing for the rear oil seal and adapter plate (1) with Loctite 596 .
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Install the drive coupling. Refer to Disassembly and Assembly, "Drive Coupling - Remove and Install".
Install flywheel housing (2) onto adapter plate (1) .End By: Install the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Start By:
Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00804894
Note: This procedure is for engines which have an adapter plate that is installed on the cylinder block. Flywheel housing (2) has a mounting flange (3) for the marine transmission.
Remove the bolts that fasten the flywheel housing to adapter plate (1) . Remove the flywheel housing.If it is necessary to remove adapter plate (1) , perform the following procedure.
Remove the drive coupling. Refer to Disassembly and Assembly, "Drive Coupling - Remove and Install".
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Remove the bolts that fasten adapter plate (1) to the cylinder block. Hit the adapter plate with a soft hammer in order to remove adapter plate (1) from the cylinder block.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00804894
If adapter plate (1) was removed, use the following procedure to install the adapter plate.
Ensure that the rear face of the cylinder block and both sides of adapter plate (1) are clean and free from damage.
Illustration 3 g00804905
Install a new gasket on location pins (4) of the cylinder block. Cut the bottom of the gasket in line with the bottom of housing (5) for the rear oil seal.
Check the alignment of the adapter plate. Refer to Testing and Adjusting, "Flywheel Housing - Adjust".
Install the bolts that fasten the adapter plate to the cylinder block and tighten to a torque of 70 N m (52 lb ft).
Illustration 4 g00804906
Fill space (6) between the bottom of the housing for the rear oil seal and adapter plate (1) with Loctite 596 .
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Install the drive coupling. Refer to Disassembly and Assembly, "Drive Coupling - Remove and Install".
Install flywheel housing (2) onto adapter plate (1) .End By: Install the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts motor Caterpillar catalog:
1911385
MOTOR GP-SWING
304, 305
304, 305
1396351
MOTOR-WIPER
303, 304, 305
303, 304, 305
D10N, D10R, D10T
2120272
MOTOR GP-PISTON
D10N, D10R, D10T
D10N, D10R, D10T
3257464
MOTOR GP-WINDOW WIPER
D10T, D10T2, D11T, D8T, D9T
D10T, D10T2, D11T, D8T, D9T
2141099
MOTOR GP-PISTON
834K, 988K, D9T
834K, 988K, D9T
PC206, PC310B
2247398
MOTOR GP-PISTON
PC206, PC310B
PC206, PC310B
2277036
MOTOR GP-GEROTOR
PC206
PC206
2361237
MOTOR GP-TRAVEL
1190, 1190T, 1290T, TK721, TK722, TK732
1190, 1190T, 1290T, TK721, TK722, TK732