MOTOR-HYD 20R2015 - Caterpillar

Illustration 1 g06220302
Table 1
Item Qty Part Specification Description
1 8 2M-1538 Taperlock Stud Torque to 37 5 N m (27 4 lb ft).
2 4 109-0078 O-Ring Seal Lubricate the bore of O-ring seals of the tube assemblies lightly with the fluid that is being sealed.
3 2 2P-4304 Hollow Stud Apply red Loctite 271 to the threads on the tapered end to the length of 10.2 1.5 mm (0.40 0.06 inch).
Torque to 80 14 N m (59 10 lb ft).
4 2 1R-1808 Engine Oil Filter Before assembly, lubricate the seal with clean oil.
Tighten to one half turn after the filter gasket contacts with filter base assembly.
5 2 4N-8150 Spring Length under test force is 55.24 mm (2.175 inch).
Test force is 75.619 5.800 N (17.0 1.3 lb).
Free length after test is 93.726 mm (3.6900 inch).
6 4 7F-9090 Drive Screw Torque to 25 6 N m (221 53 lb in).