2225379 MOTOR GP-WINDOW WIPER Caterpillar parts
D10T, D11T, D8T, D9T
Rating:
Alternative (cross code) number:
CA2225379
222-5379
2225379
CA2225379
222-5379
2225379
Weight: 2 pounds 1 kg.
TRACK-TYPE TRACTOR,
Number on catalog scheme:
17
For full view, you need register
Information:
Correction Factor
To find the correction factor, look at the SIMS and owner's records, and the machine's record. Make an estimate of the average hours per month, and, then, talk to the owner or operator to find information, like down time, for the time since the last report or record. Adjust the estimate according to this information.
If a new Service Meter is installed, the correction factor will be the number of hours the machine was in operation before the new Service Meter is installed. To find this, make an estimate, through use of the above information, of the hours the machine has been in operation since the Service Meter failure and add these hours to the hours shown on the bad meter. This is the conversion factor. Write it in the shiny area on the decal.
If repairs have been made to the electrical circuit for the Service Meter, use the information to estimate the number of hours the machine was in operation during the time the Service Meter did not work. This is the conversion factor. Write it in the shiny area on the decal.
Service Meter Correction Decal, Form No. SEHS7785 installed on Service Meter.Installation Of Decal
Clean the face of the meter. Remove the center part of the decal. Remove the back paper and install the decal on the face of the meter.
Use Of Service Meter Correction Decal
To find the number of hours a machine has operated, add the conversion factor to the meter indication.
Important: Write A Sims Report After Installation Of Service Meter Correction Decal
It is important to write a SIMS report after installation of a Service Meter correction decal. In the "HOURS" space, write the total number of hours on the machine, including the conversion factor.
Under "PART NUMBER CAUSING PROBLEM," write the part number of the Service Meter which had a failure. Under "GROUP NUMBER CONTAINING PART," write the Gauge And Warning Group Number for the machine.
UNDER "OPTIONAL COMMENTS," write "HR CORR" and the conversion factor.
Write the remainder of the report as normally done.
To find the correction factor, look at the SIMS and owner's records, and the machine's record. Make an estimate of the average hours per month, and, then, talk to the owner or operator to find information, like down time, for the time since the last report or record. Adjust the estimate according to this information.
If a new Service Meter is installed, the correction factor will be the number of hours the machine was in operation before the new Service Meter is installed. To find this, make an estimate, through use of the above information, of the hours the machine has been in operation since the Service Meter failure and add these hours to the hours shown on the bad meter. This is the conversion factor. Write it in the shiny area on the decal.
If repairs have been made to the electrical circuit for the Service Meter, use the information to estimate the number of hours the machine was in operation during the time the Service Meter did not work. This is the conversion factor. Write it in the shiny area on the decal.
Service Meter Correction Decal, Form No. SEHS7785 installed on Service Meter.Installation Of Decal
Clean the face of the meter. Remove the center part of the decal. Remove the back paper and install the decal on the face of the meter.
Use Of Service Meter Correction Decal
To find the number of hours a machine has operated, add the conversion factor to the meter indication.
Important: Write A Sims Report After Installation Of Service Meter Correction Decal
It is important to write a SIMS report after installation of a Service Meter correction decal. In the "HOURS" space, write the total number of hours on the machine, including the conversion factor.
Under "PART NUMBER CAUSING PROBLEM," write the part number of the Service Meter which had a failure. Under "GROUP NUMBER CONTAINING PART," write the Gauge And Warning Group Number for the machine.
UNDER "OPTIONAL COMMENTS," write "HR CORR" and the conversion factor.
Write the remainder of the report as normally done.
Caterpillar parts catalog:
Parts motor Caterpillar catalog:
2976813
MOTOR AS-BLOWER
814F II, 815F II, 816F, 816F II
814F II, 815F II, 816F, 816F II
2976812
MOTOR AS-BLOWER
814F II, 815F II, 816F, 816F II
814F II, 815F II, 816F, 816F II
2787133
MOTOR GP-GEROTOR
517, 527
517, 527
2261893
MOTOR GP-WINDOW WIPER
517, 527
517, 527
2356370
MOTOR GP-WINDOW WIPER
517, 527
517, 527
2078802
MOTOR AS
826G
826G
9M7428
MOTOR ASSEM.
D8H, D9G
D8H, D9G
1528367
MOTOR
D7R
D7R
3337828
MOTOR GP-PISTON
826K, 836K
826K, 836K
2952695
MOTOR GP-WINDOW WIPER
D7E, D7E LGP
D7E, D7E LGP
2952694
MOTOR GP-WINDOW WIPER
D7E, D7E LGP
D7E, D7E LGP
3402114
MOTOR GP-GEROTOR
D10T, D11T
D10T, D11T