MOTOR GP-GEROTOR 2243128 - Caterpillar

2243128 MOTOR GP-GEROTOR Caterpillar parts SG16B, SG18

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2243128
224-3128
2243128

Weight: 25 pounds 11 kg.

Buy MOTOR GP-GEROTOR 2243128 Caterpillar genuine, new aftermarket tractor parts with delivery
STUMP GRINDER,

This part in 2 request: Show. This information for suppliers only!

#1077072 2243128

2023-03-13

#638597 2243128

2021-04-21

Compatible equipment models: 2243128:

STUMP GRINDER SG16B SG18 Caterpillar

Number on catalog scheme:

Caterpillar 2243128 Parts scheme MOTOR GP-GEROTOR

For full view, you need register

Information:

Install seals (23) and (24) on manifold assembly (22). Install the seals on the manifold assembly, as shown. Put clean oil on the lip of the seals.
Illustration 4 g00952533
Align the oil holes in manifold assembly (22) with the holes in housing (13). Install the manifold assembly and bolts (19) .
Illustration 5 g00952514
Raise the temperature of bearing (16) and install bearing (16) onto hub assembly (7). Bearing (16) must be seated squarely on the hub assembly after bearing (16) has cooled.
Install three rings (15) onto hub assembly (7) .
Illustration 6 g00952511
Install bearing (14) into housing (13) .
Illustration 7 g00952588
Fasten a hoist and Tooling (A) onto housing (13) and lower the housing into position on hub assembly (7) .
Illustration 8 g00952507
Install ring (12) onto hub assembly (7) .
Illustration 9 g00952592
Start with a plate and install brake plates (20) and friction discs (21). Alternate the plates and discs.
Illustration 10 g00952627
Install plate (18) and bolts (17) onto housing (13) .
Illustration 11 g00952629
Install sleeve bearing (9) into hub assembly (7) .
Illustration 12 g00952262
Illustration 13 g00952631
Install seals (10) and (11) into piston (8) .
Put clean oil on the seals and install piston (8) into hub assembly (7) .
Illustration 14 g00952634
Install input hub (4) .
Illustration 15 g00952637
Start with a plate and install clutch plates (5) and friction discs (6) .
Illustration 16 g00952257
Illustration 17 g00952255
Install sleeve bearing (3) into plate (2) .
Position plate (2) onto the housing and install bolts (1) .End By: Connect the final drive, the steering clutch, and the brake. Refer to Disassembly and Assembly, "Final Drive, Steering Clutch, and Brake - Connect".