MOTOR GP-GEAR 2358466 - Caterpillar

Illustration 1 g00123116
Reference: Guideline For Reusable Parts, SEBF8014, "Guideline For Reusable Parts: Identification And Applications Of Transmission Clutch Plates." (1) Torque for one 1/2 inch bolt ... 110 10 N m (80 7 lb ft) (2) 4M-9592 Spring Quantity ... ten Test length ... 34.93 mm (1.375 inch) Test force ... 116.6 5.8 N (26.20 1.30 lb) Length after test ... 44.70 mm (1.760 inch) Outside diameter ... 14.27 mm (0.562 inch) (3) Thickness of eight new friction discs and six new clutch plates for the No. 4 clutch ... 51.3 1.28 mm (2.02 0.05 inch) Thickness of a single 6Y-7981 Friction Disc ... 4.32 0.10 mm (0.170 0.004 inch) Thickness of a single 3P-0337 Plate ... 2.79 0.08 mm (0.110 0.003 inch)Note: An additional 6Y-7981 Friction Disc is used as a brake for the power take-off drive. (4) Before you install the lip seal, coat the surface of the seal bore with 7M-7260 Liquid Gasket. Allow the 7M-7260 Liquid Gasket dry before you install the lip seal. Do not apply the 7M-7260 Liquid Gasket to the case for the lip seal. (5) Slightly, lubricate the seal lip with the lubricant that will be sealed.