2493063 MOTOR GP-GEAR Caterpillar parts
908
Rating:
Alternative (cross code) number:
CA2493063
249-3063
2493063
CA2493063
249-3063
2493063
Weight: 6 pounds 2 kg.
COMPACT WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$164.61
13 Jun 2022
7.5[3.38] Pounds
US: Blue Ribbon Pre
Hubbell Lighting LNC2-18LU-5K-3-1 Led Laredo Compact Wall Pack, 18 LEDs, 120-277V, 5000K, Type Iii Ies Distribution, Bronze - 2493063,
Hubbell Lighting Made in China || Package length :8.45" || Package width :12.2" || Package height :9.4"
Hubbell Lighting Made in China || Package length :8.45" || Package width :12.2" || Package height :9.4"
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 2493063:
Information:
Assembly Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01348858
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (5) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01348856
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (6). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01348740
Install the O-ring seal on elbow (6) and install elbow (6) on the engine oil cooler with the bolts.
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and elbow (8) on elbow (6).
Lubricate the O-ring seals with clean engine oil. Install the tube in bonnet (5).
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01348858
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (5) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01348856
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (6). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01348740
Install the O-ring seal on elbow (6) and install elbow (6) on the engine oil cooler with the bolts.
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and elbow (8) on elbow (6).
Lubricate the O-ring seals with clean engine oil. Install the tube in bonnet (5).
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts motor Caterpillar catalog:
1527691
MOTOR GP-WINDOW WIPER
414E, 416B, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446B, 446D, 450E, 75C, 85C, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, 910K...
414E, 416B, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446B, 446D, 450E, 75C, 85C, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, 910K...
1526640
MOTOR GP-WINDOW WIPER
902, 906, 908
902, 906, 908
1610017
MOTOR AS-BLOWER
906, 908
906, 908
3706070
MOTOR GP-PISTON
CD-54B
CD-54B
1373722
MOTOR GP-PISTON
318B, 320B, 320B FM LL, 320C, 320C FM, 322B L, 322B LN, 322C, 325 L, 325B L, 330B L, OEMS
318B, 320B, 320B FM LL, 320C, 320C FM, 322B L, 322B LN, 322C, 325 L, 325B L, 330B L, OEMS
3751643
MOTOR GP-PISTON
2864C, 586C
2864C, 586C
1765107
MOTOR GP-SWING
320B, 320B FM LL, 320B U, 321B
320B, 320B FM LL, 320B U, 321B
2087084
MOTOR & MTG GP-PROPEL
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
3203667
MOTOR GP-PISTON
623H, 623K, 623K LRC
623H, 623K, 623K LRC
1239296
MOTOR & MTG GP-VIBRATORY
CB-434B
CB-434B
1239295
MOTOR & MTG GP-VIBRATORY
CB-434B
CB-434B