MOTOR GP-PISTON 2582835 - Caterpillar

Illustration 5 g02323814
A progress bar appears, showing the progress of the data transfer as shown in Illustration 5. To exit to the previous menu, press "Ok" or remove the USB flash drive from the USB port on the control box. If more space is needed on the display, contact your site supervisor to delete some unneeded files.Working with Dialogs
The "system setup", "alignment selection", "horizontal offset" selection, "vertical offset" selection, "design selection", and the "Setup Menu - Configuration" option screens are called dialogs. Use dialogs in order to enter data. Use the dialogs in order for the Cat Grade Control system to be set up according to your requirements. The selected field in a dialog is identified by the blue background color.Press the next key (4) on the display in order to move to different fields within the dialogs.Press the arrow keys (8) on the display in order to enter data:The up arrow steps through the upper case letters "A through Z", the numbers "0 through 9", the decimal point ".", the negative sign "–", the positive sign "+", a space , and back to "A".Note: Available values will depend on the type of field that is selected. For example, the only values that are available for number fields are 0 through 9, the decimal point ".", "–", and "+".The down arrow steps through the same character set, but in reverse.When you change a character in a field, the up arrow and the down arrow start stepping from the existing character.The right arrow steps to the next character to the right. In fields that allow spaces, press the right arrow twice in order to insert a space.The left arrow is used in order to move back one character to the left. This deletes the character in the space to the left.Dialogs may contain any of the following items:Text fields - Use the text fields in order to enter your own information. For example, when you set up the name of your level surface design or sloping surface design, use arrow keys (8) to enter this data.Number fields - Use the number fields in order to enter required values. For example, when you set up the vertical and horizontal offset, use arrow keys (8) in order to enter values into these fields. List boxes - Lists options or possible selections. Use arrow keys (8) in order to select the listed item."No GPS Receiver Data"
An error such as "No GPS Receiver Data" will cause inaccurate guidance. When an error occurs, a message flashes on the screen. Guidance is not provided under these conditions. For more information, Refer to Operation and Maintenance Manual, "Flashing Messages". Illustration 6 is an example of a warning message.
Illustration 6 g02360002
No GPS receiver data message.
The "No GPS Receiver Data" warning appears when the receiver has stopped outputting data for at least 1.5 seconds.Hourglass
When the system performs an operation that takes more than a few seconds, an hourglass appears on the current screen. For example, the hourglass appears in the