MOTOR GP-GEAR 2582926 - Caterpillar

Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
399-7518 Chassis Wiring Gp - 02    
Item    Qty    Part No.    Description    
(1)     9     7K-1181     Cable Strap    
(2)     1     433-8907     Chassis Harness As    
(3)     2     132-5789     Clip    
(4)     1     4P-7581     Clip    
(5)     3     8T-4121     Hard Washer    
(6)     3     8T-4191     Bolt    
Illustration 2 g03725944
399-7518 Chassis Wiring Gp
Illustration 3 g03725984
399-7518 Chassis Wiring Gp connection locations.Installation Procedure
Illustration 4 g03725987
Close up of Area A (rear of cab) without "TOOL-20, 21, 25" + "SMART BOOM" (GK-C1) Connect to harness (12 Poles) "Position C", "K858 YL", "K862 GY", "K869 BU" (1) 7K-1181 Cable Strap (2) 433-8907 Chassis Harness As
Illustration 5 g03726502
Close up of Area A (rear of cab) with "TOOL-20, 21, 25" + "SMART BOOM" (C) 399-7514 Chassis Wiring Gp (GK-C1) Connect to harness (12 Poles) "Position C", "K858 YL", "K862 GY", "K869 BU" (1) 7K-1181 Cable Strap (2) 433-8907 Chassis Harness As
Position harness by using green tape over existing harness and connect chassis harness (2) pertaining to the tool control being installed.
Illustration 6 g03726549
Close up of Area B (right-hand side of left frame rail) without "TOOL-20, 21, 25" + "SMART BOOM" (GK-C2) Connect to STEM 3 "EXTEND" solenoid, "K858 YL", "K869 BU" (GK-C4) Connect to STEM 3 "RETRACT" solenoid, "K862 GY", "K869 BU" (with yellow tape) (1) 7K-1181 Cable Strap (2) 433-8907 Chassis Harness As (3) 132-5789 Clip (4) 4P-7581 Clip (5) 8T-4121 Hard Washer (6) 8T-4191 Bolt
Illustration 7 g03726567
Close up of Area B (right-hand side of left frame rail) with "TOOL-20, 21, 25" + "SMART BOOM" (C) 399-7514 Chassis Wiring Gp (GK-C2) Connect to STEM 3 "EXTEND" solenoid, "K858 YL", "K869 BU" (GK-C4) Connect to STEM 3 "RETRACT" solenoid, "K862 GY", "K869 BU" (with yellow tape) (1) 7K-1181 Cable Strap (2) 433-8907 Chassis Harness As (3) 132-5789 Clip (4) 4P-7581 Clip (5) 8T-4121 Hard Washer (6) 8T-4191 Bolt
Route chassis harness (2) to the right-hand side of the left frame rail as shown.