MOTOR GP- 2683633 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remote Mounted Engine Oil Filter Base
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    
Illustration 1 g01152338
Use Tooling (A) to remove engine oil filter (1) .
Remove bolts (2) and engine oil filter base (3) .Engine Mounted Engine Oil Filter Base
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 2 g01152340
Disconnect hose assemblies (4) .
Disconnect hose assembly (5) .
Remove bolts (6) and engine oil filter base (7) .
Remove oil cooler (8) and the gasket from the engine.