MOTOR GP-GEAR 2688018 - Caterpillar

(621E Shown) (1) Torque for the three bolts ... 50 7 N m (37 5 lb ft)(2) Torque for the seven studs that hold the transfer case to the transmission case, marked X ... 55 10 N m (41 7 lb ft)(3) Use shims as needed to get correct end play of bearing ... 0.15 0.05 mm (.006 .002 in)(4) Torque for 2 studs ... 100 15 N m (75 11 lb ft) Apply 5P3413 pipe Sealant to lower hole only.(5) Torque for six bolts ... 50 7 N m (37 5 lb ft)(6) Torque for ten bolts ... 50 7 N m (37 5 lb ft)