2692116 MOTOR GP- Caterpillar parts
Rating:
Alternative (cross code) number:
CA2692116
269-2116
2692116
CA2692116
269-2116
2692116
Weight: 8 pounds 3 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$24.99
05 Apr 2024
US: GULUANT
GULUANT 2 Pack Replacement 323-7 Screw for Toro 01-150-0180 01-178-0610 32-9160 3224-3 908035 908035P AU413-620 ST80474 ST80702 142-0577 Lawn Mower Models
GULUANT Replaces Part Number: 323-7 || Compatible With: For Toro Lawn Mower Models || Fits Models: 01-150-0180, 01-178-0610, 32-9160, 3224-3, 908035, 908035P, AU413-620, ST80474, ST80702, 142-0577 || Package Includes: 2 x Screws || Every Product from GULUANT will enjoy 30 days Money-back and 18-Month Worry-free Warranty; If you have any questions, please feel free to contact us.
GULUANT Replaces Part Number: 323-7 || Compatible With: For Toro Lawn Mower Models || Fits Models: 01-150-0180, 01-178-0610, 32-9160, 3224-3, 908035, 908035P, AU413-620, ST80474, ST80702, 142-0577 || Package Includes: 2 x Screws || Every Product from GULUANT will enjoy 30 days Money-back and 18-Month Worry-free Warranty; If you have any questions, please feel free to contact us.
$544.95
07 Nov 2023
1.0[0.45] Pounds
Amazon.com
COMP Cams 26921-16 Race Street 1.320" OD Dual Springs; 1.770" Installed Height; 16 Springs
Comp Cams Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts. || More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift. || Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640" - 2.000" and . O.D.'s from 1.101" to 1.590", making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads. || Small Footprint, Large Lift - The 26921 Dual Spring delivers high spring rate, moderate installed height, high lift capacity and a small footprint. At only 1.320" OD, the 26921 is ideal for smaller spring pocket applications that need high valve lift capacity. || Made in USA
Comp Cams Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts. || More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift. || Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640" - 2.000" and . O.D.'s from 1.101" to 1.590", making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads. || Small Footprint, Large Lift - The 26921 Dual Spring delivers high spring rate, moderate installed height, high lift capacity and a small footprint. At only 1.320" OD, the 26921 is ideal for smaller spring pocket applications that need high valve lift capacity. || Made in USA
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B Loctite 243 - Note: The cooling system components and weights may vary depending on your arrangement.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01228737
Illustration 2 g01228735
Install bearings (7) on fan shaft (6). Tighten setscrews (12) in bearings (7).
Illustration 3 g01228847
Attach a suitable lifting device to pulley (8). The weight of pulley (8) is approximately 32 kg (70 lb). Position key (11) and pulley (8) on the fan shaft. Install bolts (9).
Apply Tooling (B) to setscrew (10). Tighten setscrew (10).
Illustration 4 g01228723
Attach a suitable lifting device to fan shaft (6), bearings (7), and pulley (8). The weight of fan shaft (6), bearings (7), and pulley (8) is approximately 70 kg (150 lb). Place fan shaft (6), bearings (7), and pulley (8) in a vertical position.
Illustration 5 g01228708
Attach a suitable lifting device to fan assembly (1). The weight of fan assembly (1) is approximately 225 kg (500 lb). Install fan assembly (1) on fan shaft (6). Install key (5).
Illustration 6 g01228704
Install retainer (4). Raise fan assembly (1) to retainer (4).
Illustration 7 g01228703
Install bolts (2). Apply Tooling (B) to setscrews (3). Tighten setscrews (3).End By:
Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
B Loctite 243 - Note: The cooling system components and weights may vary depending on your arrangement.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01228737
Illustration 2 g01228735
Install bearings (7) on fan shaft (6). Tighten setscrews (12) in bearings (7).
Illustration 3 g01228847
Attach a suitable lifting device to pulley (8). The weight of pulley (8) is approximately 32 kg (70 lb). Position key (11) and pulley (8) on the fan shaft. Install bolts (9).
Apply Tooling (B) to setscrew (10). Tighten setscrew (10).
Illustration 4 g01228723
Attach a suitable lifting device to fan shaft (6), bearings (7), and pulley (8). The weight of fan shaft (6), bearings (7), and pulley (8) is approximately 70 kg (150 lb). Place fan shaft (6), bearings (7), and pulley (8) in a vertical position.
Illustration 5 g01228708
Attach a suitable lifting device to fan assembly (1). The weight of fan assembly (1) is approximately 225 kg (500 lb). Install fan assembly (1) on fan shaft (6). Install key (5).
Illustration 6 g01228704
Install retainer (4). Raise fan assembly (1) to retainer (4).
Illustration 7 g01228703
Install bolts (2). Apply Tooling (B) to setscrews (3). Tighten setscrews (3).End By:
Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Parts motor Caterpillar catalog:
2690412
MOTOR GP-
Caterpillar
Caterpillar
2683633
MOTOR GP-
Caterpillar
Caterpillar
2682874
MOTOR GP-
Caterpillar
Caterpillar
2671058
MOTOR GP-SWING
Caterpillar
Caterpillar
2668807
MOTOR GP-
Caterpillar
Caterpillar
2658749
MOTOR GP-MTG&
Caterpillar
Caterpillar
2742115
MOTOR GP-
Caterpillar
Caterpillar
2741974
MOTOR GP-PSTN
Caterpillar
Caterpillar
2740665
MOTOR GP
Caterpillar
Caterpillar
2720023
MOTOR GP-
Caterpillar
Caterpillar
2701894
MOTOR GP-
Caterpillar
Caterpillar
2699212
MOTOR GP-PSTN
Caterpillar
Caterpillar