MOTOR GP-PISTON 3073082 - Caterpillar

Remove nut (5). Remove diaphragm assembly (3) from regulator body (4).
Illustration 4 g00782584
Remove plate (6) from regulator body (4).
Illustration 5 g00782590
Remove adapter ring (7) and the O-ring seal.
Illustration 6 g00782658
Remove two screws (9). Remove valve assembly (8) and O-ring seal (10).
Illustration 7 g00782662
Remove self-locking nut (10) from valve assembly (8).
Illustration 8 g00782670
Remove metal washer (13), plastic washer (12), and valve disc (11) from valve assembly (8). If necessary, remove the seal from valve disc (11).
Illustration 9 g00782694
Remove valve (14) from valve assembly (8).
Illustration 10 g00782698
Remove spring washer (15) and O-ring seal (16) from valve (14).
Illustration 11 g00782704
Illustration 12 g00782708
Remove dowel pin (17) from shaft (18) and remove shaft (18) from valve assembly (8).
Remove retaining ring (19) from shaft (18).
Illustration 13 g00782712
Remove shaft (20) from valve assembly (8).
Illustration 14 g00782714
Remove rubber diaphragm (21) and washer (22) from shaft (20).
Illustration 15 g00782719
Remove plastic bushing (23) from valve assembly (8).
Illustration 16 g00782723
Remove spring (25) from regulator body (4).
Remove three screws (24) and diaphragm assembly (26).
Illustration 17 g00782733
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Diaphragm assembly (26) consists of spring (28), spring seat (29), retainer (30), spring seat (31), spring (32), and shaft (33).