AVSPARE.COM
parts catalog

MOTOR GP-PISTON 3560948 - Caterpillar


3560948 MOTOR GP-PISTON Caterpillar parts
Rating:
17
Alternative (cross code) number:
CA3560948
356-0948
3560948
Caterpillar 3560948 MOTOR GP-PISTON
Weight: 31 pounds 14 kg.

Buy MOTOR GP-PISTON 3560948 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2
  For full view, you need register

Information:

1. Remove seals (1) from the spacer plate. 2. Install six 3/8" -16 NC forcing screws (3) in the spacer plate. Tighten the screws evenly until the plate is free of the dowels on the cylinder head.
Do not damage dowels (2) as the plate is removed.
Install Spacer Plates
1. Make sure the spacer plate and the machined surface (3) of the cylinder block are clean and free of dirt and foreign material.2. Install O-ring seals (1).3. Put a new gasket into position over dowels (3) on the cylinder block. 4. Install spacer plate (4).
Both surfaces of the spacer plate, gasket and the top of the cylinder block must be clean. Do not use a gasket adhesive or other substances of these surfaces.
5. Install a new washer seals in the spacer plate.6. Check the cylinder liner projection. See Install Cylinder Liners.End By:a. install cylinder head

Caterpillar parts catalog:

Caterpillar parts catalog
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine


Parts motor Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.