MOTOR GP-WINDOW WIPER 3791084 - Caterpillar

start by:a) remove radiatorb) remove oil pan 1. Remove the rear oil filter from the engine oil cooler and put tooling (A) in position under engine.2. Put tooling (B) in position under tooling (A) as shown. 3. Remove two bolts (1) that hold the support to the frame.4. With tooling (B) lift the engine enough to take the weight of the engine off of the front support.5. Remove four bolts (2) and the washers that hold support (3) to the timing gear cover. 6. Remove two bolts (5), the nuts and washers that hold supports (3) and (6) together.7. Remove support (6) and mount assemblies (4). Remove support (3).8. Put support (3) in position and install bolts (2) and the washers to hold it to the timing gear cover.9. Put the lower half of mount assemblies (4) in position on the tractor frame.10. Put support (6) in position and install bolts (5), the nuts and washers to hold the supports together. 11. Install the upper half of mount assemblies (4) and bolts (1).12. Lower the engine with tooling (B) and tighten bolts (1).13. Remove tooling (A) and (B) and install the rear oil filter on the engine oil cooler.end by:a) install oil panb) install radiator