MOTOR GP-SWING 3932179 - Caterpillar

Table 1
Spacer Chart for the Outlet Relief Valve    
Pt. No. for the Spacers     Thickness of the Spacers     Pressure Change from one Spacer    
5M-9624 Spacer    
0.25 mm (0.010 inch)    
5 kPa (0.7 psi)    
5M-9623 Spacer    
0.90 mm (0.035 inch)    
18 kPa (2.6 psi)    Inlet Relief Valve
Torque converter inlet pressure ... 930 35 kPa (135 5 psi)
Table 2
Spacer Chart for the Inlet Relief Valve    
Pt. No. for the Spacers     Thickness of the Spacers     Pressure Change from one Spacer    
5M-9624 Spacer    
0.25 mm (0.010 inch)    
14 kPa (2.0 psi)    
5M-9623 Spacer    
0.90 mm (0.035 inch)    
50 kPa (7.3 psi)    Transmission
Table 3
Speed     Engaged Clutches     Torque Converter Drive     Direct Drive (1)    
NEUTRAL     1     X     -    
REVERSE     1 and 7     X     -    
FIRST Speed     2 and 6     X     X    
SECOND Speed     1 and 6     -     X    
THIRD Speed     3 and 6     -     X    
FOURTH Speed     1 and 5     -     X    
FIFTH Speed     3 and 5     -     X    
SIXTH Speed     1 and 4     -     X    
SEVENTH Speed     3 and 4     -     X    
( 1 ) The lockup clutch is engaged.
Table 4
Transmission Shift Points (1)    
Upshift     Standard     Retarder    
1C to 1L (2) (3)     -     -    
1L to 2     1820 30     2020    
2 to 3     1820 30     2020    
3 to 4     1820 30     2020    
4 to 5     1820 30     2020    
5 to 6     1820 30     2020    
6 to 7     1820 30     2020    
Downshift     Standard     Retarder    
7 to 6     1260 20     1420    
6 to 5     1260 20     1420    
5 to 4     1260 20     1420    
4 to 3     1260 20     1420    
3 to 2     1260 20     1420    
2 to 1L     1260 20     1420    
1L to 1C     1260 20     -    
( 1 ) The listed engine speeds are nominal engine speeds.
( 2 ) (C) Torque converter drive
( 3 ) Direct drive (lockup clutch engaged).Transmission Oil Pressure
Transmission lubrication pressure at high idle ... 110.31616 27.57904 kPa (16 4 psi)Transmission lubrication pressure at low idle ... 22.4 19 kPa (3.25 2.75 psi)