MOTOR AS 4231942 - Caterpillar

Table 1
Transmission Pressure Chart    
Pressure     Pressure Tap     Low Idle     High Idle     Adjustment    
Converter Inlet
Pressure (P3)     (A)        
860 140 kPa (125 20 psi)     None. With cold oil the value should be
1000 kPa (145 psi) maximum.    
Speed Clutch (P1) (Initial Pressure)     (B)    
530 35 kPa (77 5 psi)
with the transmission lever in NEUTRAL. Load piston plug (LP) removed.         Add or remove spacers (25) in load piston (24) in selector and pressure control valve ( 1). See Spacer Chart.    There are additional rows in Table 1 that are not shown.