MOTOR GP-PRV12 4433488 - Caterpillar

Hot Surface (3)This safety message for hot surfaces is located on the side of the enclosure and the top of the enclosure.
Illustration 7 g01085603
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Automatic Starting (4)This safety message is located on the side of the enclosure and on the control panel.
Illustration 8 g01154070
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Electrocution (5)
This safety message is located on the side of the enclosure.
Illustration 9 g00928349
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Do not connect generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution system can occur and could cause personal injury or death.Open and secure main distribution system switch, or if the connection is permanent, install a double throw transfer switch to prevent electrical feedback. Some generators are specifically approved by a utility to run in parallel with the distribution system and isolation may not be required. Always check with your utility as to the applicable circumstances.
Lifting the Genset (6)This safety message for lifting the generator set is located on the side of the enclosure.
Illustration 10 g00928085
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Universal Warning (7)This safety message is located on the control panel.
Illustration 11 g00934493
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Electrical Shock (8)The safety message for electrical shock is located on the control panel.
Illustration 12 g01120247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.