MOTOR GP-BROOM 4485689 - Caterpillar

4485689 MOTOR GP-BROOM Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4485689
448-5689
4485689

Weight: 37 pounds 16 kg.

Buy MOTOR GP-BROOM 4485689 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 7 request: Show. This information for suppliers only!

2024-08-13

2024-01-26

2023-09-29

2022-09-08

2022-06-20

2022-05-17

2020-12-15

Number on catalog scheme: 2

Caterpillar 4485689 Parts scheme MOTOR GP-BROOM

For full view, you need register

Information:

Illustration 1 g01285332
Top View of the Blade Slope Sensor (1) Blade (2) Straight Edge (3) Blade Slope Sensor
Illustration 2 g01285398
Place one end of a 4 foot straight edge against the vertical edge of the Blade Slope Sensor.
Hang a plumb bob off the other end of the straight edge.
Illustration 3 g01285466
Measure the horizontal distance from the blade to the string line of the plumb bob. Note the measurement.
Repeat Step 1 through Step 3 for the other side of the blade.
Subtract the two measurements.The result should be less than 12.7 mm (0.5 inch).If the result is greater than 12.7 mm (0.5 inch) proceed to Step 6. Otherwise, the Blade Slope Sensor is properly mounted.
Loosen the bolts on the Blade Slope Sensor.
Rotate the Blade Slope Sensor in the direction that is needed.
Tighten the bolts.
Recheck the measurements.If the result is greater than 12.7 mm (0.5 inch), proceed to Step 10.Otherwise, the Blade Slope Sensor is properly mounted.
Remove the bracket for the Blade Slope Sensor. Reweld the bracket.Note: The fore/aft pitch of the bracket must be within 3 degrees of the fore/aft pitch of the platform (circle).