MOTOR GP- 4618765 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     1    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00975762
Install steering clutch and brake control valve (5) .
Illustration 2 g00975761
Install bolts (6) .
Illustration 3 g00975760
Remove Tooling (A) and the suitable lifting device from steering clutch and brake control valve (5) .
Illustration 4 g00975759
Install bolt (4) .
Illustration 5 g00975758
Connect hose assemblies (3) .
Illustration 6 g00975757
Connect harness assemblies (2) .
Illustration 7 g00975751
Install floorplate (1) .