MOTOR & MTG GP-TRAVEL 5192479 - Caterpillar

Select "PROG KW RELAY TRIP #N PERCENTAGE THRESHOLD". Press the "OK" key to edit the current "PROG KW RELAY TRIP #N PERCENTAGE THRESHOLD". A screen like Illustration 8 appears.
Illustration 8 g02276333
Select the "PROG KW RELAY TRIP #N PERCENTAGE THRESHOLD" to program. Press the "OK" key. A screen like Illustration 9 appears.
Illustration 9 g02276335
Select "PROG KW RELAY TRIP #N HYSTERESIS PERCENTAGE". Press the "OK" key to edit the current "PROGRAMMABLE TRIP POINT FUNCTION #N HYSTERESIS PERCENTAGE". A screen like Illustration 10 appears.
Illustration 10 g02276394
Select the "PROG KW RELAY TRIP #N HYSTERESIS PERCENTAGE" that you want to program. Press the "OK" key. A screen like Illustration 11 appears.
Illustration 11 g02276397
Select "PROG KW RELAY TRIP #N TRIP ACTIVATION DELAY TIME". Press the "OK" key to edit the current "PROGRAMMABLE TRIP POINT FUNCTION #N TRIP ACTIVATION DELAY TIME". A screen like Illustration 12 appears.
Illustration 12 g02276395
Select the "PROG KW RELAY TRIP #N TRIP ACTIVATION DELAY TIME" to program. Press the "OK" key. A screen like Illustration 13 appears.
Illustration 13 g02276396
Select "PROG KW RELAY TRIP #N TRIP DEACTIVATION DELAY TIME". Press the "OK" key to edit the current "PROG KW RELAY TRIP #N TRIP DEACTIVATION DELAY TIME". A screen like Illustration 14 appears.
Illustration 14 g02276413
Select the "PROG kW RELAY TRIP #N TRIP DEACTIVATION DELAY TIME" to program. Press the "OK" key. Configuring the Programmable kW Relays using the Cat ET
Connect Cat ET to the EMCP 4.
Illustration 15 g02276574
Select "kW Relay Setpoints" on the left. Refer to Illustration 16.
Illustration 16 g02276575
Double click the "Programmable Trip Point #N Trigger Condition" setpoint to change this value from the drop-down menu. Click the "OK" button to program. Refer to Illustration 17.
Illustration 17 g02276576
Double click the "Programmable Trip Point #N Percentage Threshold" setpoint to change this value. Click the "OK" button to program. Refer to Illustration 18.
Illustration 18 g02276577
Double click the "Programmable Trip Point #N Hysteresis Percentage" setpoint to change this value. Click the "OK" button to program. Refer to Illustration 19.
Illustration 19 g02276578
Double click the "Programmable Trip Point #N Output #1 Trip Activation Delay Time" setpoint to change this value from the drop-down menu. Click the "OK" button to program. Refer to Illustration 20.
Illustration 20 g02276579
Double click the "Programmable Trip Point #N Output #12 Trip Deactivation Delay Time" setpoint to change this value from the drop-down menu. Click the "OK" button to program.
Repeat the above steps to program an additional timer.