MOTOR GP- 5401591 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
When a Caterpillar Extended Life Coolant (ELC) is used, an extender must be added to the cooling system. See the Operation and Maintenance Manual, "Maintenance Interval Schedule" for the proper service interval. The amount of extender is determined by the cooling system capacity.For additional information about adding an extender, see Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" or consult your Caterpillar dealer.Extended Life Coolant (ELC) Extender
Use a 8T-5296 Coolant Conditioner Test Kit to check the concentration of the coolant.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Illustration 1 g03570938
The filler cap is located beneath the access cover on top of the hood, forward of the engine exhaust tube. Loosen the filler cap slowly in order to relieve pressure. Remove the filler cap.
Draining some coolant from the radiator may be necessary so that Extender can be added to the cooling system. Note: Always discard drained fluids according to local regulations.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Add proper mixture of Extender to the cooling system.
Start the engine. Run the engine without the filler cap until the thermostat opens and the coolant level stabilizes. Check for leaks.
Maintain the coolant at the proper level as the thermostat opens, and air is purged from the system. Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check".
Inspect the filler cap for any signs of damage. Replace if necessary. Install the filler cap.