MOTOR GP-SWING 5493964 - Caterpillar

The parameters for operation for a typical diesel power module that is rated at 480 Volts are displayed in table 1. Help is available for each parameter. This information is accessed by touching the button for "HELP" (6) when the parameter is highlighted in the list. The minimum values and the maximum values for each number that can be set can be checked by touching the button for "HELP" (24). The operator must touch the button for "ENTER" on the keypad in order to make the change permanent.The parameters for operation for a typical diesel power module that is rated at 4200 Volts are displayed in table 2. Help is available for each parameter. This information is accessed by touching the button for help (6) when the parameter is highlighted in the list. The minimum values and the maximum values for each number that can be set can be checked by touching the button for help (6). The operator must touch the button for "ENTER" (24) in order to make the change permanent.Configuration Screen for Multifunction Relays
Illustration 2 g00854462
Configuration Screen for Multifunction Relays (14) Button for login (15) Icon for logged In (16) Button for "LOG OUT" (17) Button for "RETURN" (18) Button for scrolling in the UP direction (19) Indicator for "STATUS" (20) Indicator for "SELECTION" (21) Button for "COOLDOWN" selection (22) Button for "SHUTDOWN" selection (23) Button for scrolling in the DOWN direction (24) Button for "ENTER" (25) Arrow for selectionThe button for "MFR COOLDOWN" (5) on the secured "SETUP" screen displays the screen that appears in illustration 2. the secured "SETUP" screen appears in illustration 1. Events that are normally cool down events may be configured in order to be shut down events. The Indicator for "SELECTION" may be changed between the "COOLDOWN" mode and the "SHUTDOWN" mode.Perform the following steps in order to change the mode of an event.
Ensure that the user is logged in.
Select the event. Use the button for scrolling in the UP direction (18) or use the button for scrolling in the DOWN direction (23) .
Use the button for "COOLDOWN" (21) or use the button for "SHUTDOWN" (22) in order to select the mode.Note: If the "UMR FAULT" is set for "SHUTDOWN" the other functions may appear to be independently set. However, the other functions are not set independently. When the mode is set for "SHUTDOWN" all functions are set to the "SHUTDOWN" mode. If the mode is set for "COOLDOWN" the other functions may be set for "SHUTDOWN" or "COOLDOWN".
Touch the button for "ENTER" (24) in order to make the change permanent.A UMR event has been selected in Illustration 2. The shut down mode has been selected. If the operator presses the button for "ENTER" (24), this event will result in a shutdown. The operator may return to the previous setup screen by using the button for "RETURN" (17) .Screen for Tools
Illustration 3 g00854568
Screen for Tools (26) Button for "DATE/TIME SETUP" (27) Button for "SOFTWARE VERSION" (28) Button for "CONFIGURE PASSWORDS" (29)