MOTOR GP-PISTON 6E1141 - Caterpillar

Illustration 12 g01583773
View of the loader joystick, the parking brake lever, and the parking brake release lever (33) Joystick for the loader (55) Loader joystick switch for both neutralization and downshift function (56) Parking brake release lever (28) Parking brake leverThe joystick for the loader (33) with a pilot controlled loader valve is shown. With a pilot controlled loader valve, the joystick also includes a thumb wheel (55) that controls the auxiliary functions. There is one switch that is located on the front of the joystick, the switch serves as both the transmission neutralizer switch and the downshift switch. This switch is not visible in Illustration 12. The parking brake release lever (56) is located at the front of the parking brake lever (28).
Illustration 13 g01584014
View of the left side of the right panel (33) Joystick for the loader (56) Parking brake release lever (28) Parking brake lever (57) Transmission neutralizer switch (58) Control of the multipurpose lever (if equipped)The joystick for the loader (33) that has a mechanically controlled valve is shown. With a mechanically controlled loader control valve, a multipurpose lever (58) is located between the joystick (33) and parking brake lever (28). The transmission neutralizer switch (57) is also located on the front of the joystick. The parking brake release lever (56) is located at the front of the parking brake lever (28).
Illustration 14 g01584054
View of the joystick with a pilot controlled backhoe valve (59) Joysticks for the backhoe (60) Boom lock lever (61) Pilot control pod leverThe joysticks for the backhoe (59) with a pilot controlled backhoe valve are shown. The left pilot joystick is equipped with thumb switches to control the auxiliary functions (if equipped) and a horn switch. The right joystick is equipped with a thumb switch. The thumb switch controls the following:
An extendable stick
A hammer The boom lock lever (60) locks the boom in place for machine travel. The pilot control pod lever (61) allows adjustment of the pilot pod.
Illustration 15 g01584073
View of the joysticks with a mechanically controlled backhoe valve (62) Joysticks for the backhoe The joysticks for the backhoe (62) with a mechanically controlled backhoe valve are shown.The default pattern of the joystick is the excavator pattern. An alternate pattern for the backhoe can be selected with the switch for the pattern of the joystick. The excavator pattern follows:
Table 1
Left Joystick    Right Joystick    
Forward: Stick Out     Forward: Boom Lower    
Rear: Stick In     Rear: Boom Raise    
Right: Swing Right     Right: Bucket Dump    
Left: Swing Left     Left: Bucket Close    The pattern for the backhoe follows:
Table 2
Left Joystick    Right Joystick    
Forward: Boom Lower     Forward: Stick In    
Rear: Boom Raise     Rear: Stick Out    
Right: Swing Right     Right: Bucket Dump    
Left: Swing Left     Left: Bucket Close    Components at the Right Side of the Cab
The following components are located at the right side of the cab.A storage compartment is located next to the switch for the pattern of the