MOUNT 1051797 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     126-7183     Crossblock     1    
126-7176
or
8S-5133
8S-6470 Forcing Screw
or
Plug
Screw     1    
126-7182 Nut     1    
1F-6296 Bolt     2    
126-7181 Sliding Plate     2    Start By:
Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01355107
Remove bolts (5) and flange (4) from housing assembly (2) . Remove O-ring seal (3) from flange (4) . Remove O-ring seal (1) from housing assembly (2) .
Illustration 2 g01355134
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (6) and adapter (7) from housing assembly (2) . Remove O-ring seal (8) from adapter (7) .
Remove bolt (15) . Use Tooling (A) in order to remove impeller (9) .
Remove the spring, the retainer assembly, and the carbon seal from seal assembly (16) . The rubber seal and the ceramic ring will be removed after the shaft assembly is removed.
Remove bolts (11) and thrust washer (10) .
Remove shaft assembly (12) .
Carefully remove the rubber seal and the ceramic ring from seal assembly (16) .
Remove lip seal (13) from housing assembly (2) .
Remove bearing (14) from housing assembly (2) .