1401289 MOUNT Caterpillar parts
D250E, D250E II, D300E, D300E II
Rating:
Alternative (cross code) number:
CA1401289
140-1289
1401289
CA1401289
140-1289
1401289
Weight: 33 pounds 15 kg.
ARTICULATED TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
14 Oct 2017
BLQ: BLQ
1401289 MOUNT-SUSP
1401289 MOUNT-SUSP
1401289 MOUNT-SUSP
This part in 4 request:
Show.
This information for suppliers only!
2025-02-07
2024-12-12
2021-02-25
2018-03-10
Number on catalog scheme:
3
For full view, you need register
Information:
Crankshaft Front Seal
Depth of the crankshaft front seal from the front face of the oil seal housing ... 10.20 to 10.70 mm (0.402 to 0.421 inch)Crankshaft Rear Seal
A new crankshaft rear seal has a plastic sleeve inside the seal. The plastic sleeve is used to protect the seal. The plastic sleeve is also used to assemble the seal to the engine. The seal must be aligned to the engine. Use the alignment tool Ft-2806.
Illustration 1 g00955880
The sequence for the rear oil seal
(1) Tighten the bolts in the numerical sequence that is shown in illustration 1. Tighten the bolts to the following torque. ... 22 N m (16 lb ft)Wear Sleeve
Illustration 2 g00886912
The flange for the crankshaft wear sleeve
Note: If the crankshaft flange has a wear groove, use a 209-8228 Sleeve to renew the sealing surface before the housing assembly is installed. (2) The gap between the wear sleeve and the cylinder block is the following distance. ... 0.4 to 0.6 mm (0.016 to 0.024 inch) (3) Apply a continuous bead of 138-8436 Liquid Gasket around the inner surface of the wear sleeve. ... 5 mm (0.20 inch) (4) Crankshaft (5) Wear sleeve installation tool
Depth of the crankshaft front seal from the front face of the oil seal housing ... 10.20 to 10.70 mm (0.402 to 0.421 inch)Crankshaft Rear Seal
A new crankshaft rear seal has a plastic sleeve inside the seal. The plastic sleeve is used to protect the seal. The plastic sleeve is also used to assemble the seal to the engine. The seal must be aligned to the engine. Use the alignment tool Ft-2806.
Illustration 1 g00955880
The sequence for the rear oil seal
(1) Tighten the bolts in the numerical sequence that is shown in illustration 1. Tighten the bolts to the following torque. ... 22 N m (16 lb ft)Wear Sleeve
Illustration 2 g00886912
The flange for the crankshaft wear sleeve
Note: If the crankshaft flange has a wear groove, use a 209-8228 Sleeve to renew the sealing surface before the housing assembly is installed. (2) The gap between the wear sleeve and the cylinder block is the following distance. ... 0.4 to 0.6 mm (0.016 to 0.024 inch) (3) Apply a continuous bead of 138-8436 Liquid Gasket around the inner surface of the wear sleeve. ... 5 mm (0.20 inch) (4) Crankshaft (5) Wear sleeve installation tool
Caterpillar parts catalog:
Parts mount Caterpillar catalog:
120M, 12M, 140M, 14M, 160M, 16H, 303.5D, 303.5E, 303E CR, 304D CR, 304E, 305.5D, 305.5E, 305D CR, 305E, 3176B, 3176C, 3196, 3208, 320B, 325B L, 3304, 3304B, 3306, 3306B, 330B L, 330C, 330C L, 345B L, ...
14M, 16M, 24H, 24M, 3126B, 3176B, 3176C, 3196, 3306, 3306B, 3406B, 3406C, 3406E, 3412C, 3456, 517, 525D, 527, 533, 535D, 543, 545D, 555D, 561M, 561N, 611, 613C II, 613G, 615C, 621B, 621F, 621G, 621H, ...
10-20B, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140...
3116, 3176, 414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 554, 564, 574B, 725, 725C, 730, 730C, 735, 740, 914G, 924G, 924GZ, 930G, 933, 93...
120K, 120K 2, 12K, 140K, 140K 2, 160K, 2384C, 2470C, 2484C, 2570C, 2670C, 2864C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14M, 16...
30/30, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G, 69D, 735, 740, 769C, 769D, 770, 771C, 771D, 772, 772B, 773B, 773D,...
5110B, 621H, 621K, 623H, 623K, 623K LRC, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637E, 637G, 641B, 651E, 657B, 657E, 657G, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770G, 770G OEM, 772G, 772G OEM, 8...
1423921
MOUNT
D250D, D250E
D250D, D250E
725, 725C, 730, 730C, D250E II, D300E II
1423921
MOUNT
D250D, D250E
D250D, D250E
769C, 770, 771C, 772, 772B, 773B, 773D, 773E, 775B, 775D, 775E, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, AE40 II, D44B, D550B, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700 II, R1700...
7W3498
MOUNT AS
784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ
784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ
69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793B, 793C, 793D
9W9876
MOUNT-CAB
768C, 769C, 771C, 772B, 773B, 775B, 776C
768C, 769C, 771C, 772B, 773B, 775B, 776C
776C, 776D, 777, 777B, 777D
2405449
MOUNT AS
776D, 777D
776D, 777D
3603872
MOUNT AS-SENSOR
785C, 785D, 789C, 793D, 793F, 797F
785C, 785D, 789C, 793D, 793F, 797F
3377144
MOUNT AS-SENSOR
785C, 785D, 789C, 793D, 797B
785C, 785D, 789C, 793D, 797B
735, 735B, 740, 740B, D350E II, D400E II
725, 725C, 730, 730C, D250E II, D300E II