1533411 MOUNT AS Caterpillar parts
3412, 3412C, G3412
Rating:
Alternative (cross code) number:
CA1533411
153-3411
1533411
CA1533411
153-3411
1533411
Weight: 1 pounds 0 kg.
GENERATOR SET,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$60.58
16 Nov 2022
US: Sweet Lee
KTXX A/C Refrigerant Discharge Hose Delco 1533411
KTXX Item Description: NEW A/C REFRIGERANT DISCHARGE HOSE; This is a for a new replacement A/C Refrigerant Discharge Hose (A/C Refrigerant Discharge Hose) (Discharge Line (High Side) usually connects the Compressor to the Condenser); . || Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase! || OEM and Competitor Interchange || Delco:1533411 || Delco:1533478
KTXX Item Description: NEW A/C REFRIGERANT DISCHARGE HOSE; This is a for a new replacement A/C Refrigerant Discharge Hose (A/C Refrigerant Discharge Hose) (Discharge Line (High Side) usually connects the Compressor to the Condenser); . || Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase! || OEM and Competitor Interchange || Delco:1533411 || Delco:1533478
Information:
Straight Forward Operation
Illustration 6 g00281018
Straight Forward Operation
Typical Illustration
(5) Side gear. (6) Driven clutch. (11) Driven clutch. (12) Side gear. (17) Spider. (22) Teeth of the spider. (23) Teeth of the driven clutches.
When the machine has straight forward movement, teeth (22) on both sides of spider (17) are fully engaged with teeth (23) of driven clutches (6) and (11). The following combination forces the differential together. The reverse angle of the teeth on the clutches and on the spider, the force of springs (7) and (10), cams (21) and center cam (15). This forces the engagement of the teeth of the clutches with the teeth of the spider.In this condition, driven clutches (6) and (11) are fully engaged with spider (17). The driven clutches turn side gears (5) and (12) at the same speed as the bevel gear. The two side gears turn the axle shafts at the same speed as the bevel gear.Forward Turn with Power
Illustration 7 g00281019
Forward Right Turn with Power
Typical Illustration
(5) Side gear. (6) Driven clutch. (11) Driven clutch. (12) Side gear. (17) Spider.
During a turn, the outside wheel travels a longer distance than the inside wheel. When the machine turns with power, the NoSPIN differential allows the outside wheel to turn faster than the speed of the opposite wheel. The NoSPIN differential does not allow the inside axle shaft to turn at a rate that is slower than the speed of the bevel gear. The inside axle shaft turns at the same speed as the bevel gear.The teeth of the spider transfer the force to the inside driven clutch. The inside driven clutch turns the inside axle shaft at the same speed as the bevel gear. The inside driven clutch provides the power that is necessary to move the machine through the turn.The traction of the road causes the outside wheel to turn at a speed that is faster than the speed of the inside wheel. This causes the driven clutch for the outside wheel to turn faster than the speed of the bevel gear. The movement of one wheel faster than the movement of another wheel begins the clutch action of the NoSPIN differential.The cam for the driven clutch of the inside wheel has teeth. The teeth are engaged with the teeth of center cam (15). The teeth stay in the same position in relation to spider (17). The teeth of the inside drive clutch are engaged with the spider. The teeth on the other side of center cam (15) are used as ramps. The cam for the driven clutch of the outside wheel has teeth. The teeth move up the teeth of the center cam (15). This causes the outside driven clutch to move away from the spider and away from the center cam (15). The outside driven clutch is not engaged with the spider.The driven clutch for the outside wheel cannot engage with the spider until the outside axle shaft slows to the lower speed of the bevel gear. The holdout ring prevents the
Illustration 6 g00281018
Straight Forward Operation
Typical Illustration
(5) Side gear. (6) Driven clutch. (11) Driven clutch. (12) Side gear. (17) Spider. (22) Teeth of the spider. (23) Teeth of the driven clutches.
When the machine has straight forward movement, teeth (22) on both sides of spider (17) are fully engaged with teeth (23) of driven clutches (6) and (11). The following combination forces the differential together. The reverse angle of the teeth on the clutches and on the spider, the force of springs (7) and (10), cams (21) and center cam (15). This forces the engagement of the teeth of the clutches with the teeth of the spider.In this condition, driven clutches (6) and (11) are fully engaged with spider (17). The driven clutches turn side gears (5) and (12) at the same speed as the bevel gear. The two side gears turn the axle shafts at the same speed as the bevel gear.Forward Turn with Power
Illustration 7 g00281019
Forward Right Turn with Power
Typical Illustration
(5) Side gear. (6) Driven clutch. (11) Driven clutch. (12) Side gear. (17) Spider.
During a turn, the outside wheel travels a longer distance than the inside wheel. When the machine turns with power, the NoSPIN differential allows the outside wheel to turn faster than the speed of the opposite wheel. The NoSPIN differential does not allow the inside axle shaft to turn at a rate that is slower than the speed of the bevel gear. The inside axle shaft turns at the same speed as the bevel gear.The teeth of the spider transfer the force to the inside driven clutch. The inside driven clutch turns the inside axle shaft at the same speed as the bevel gear. The inside driven clutch provides the power that is necessary to move the machine through the turn.The traction of the road causes the outside wheel to turn at a speed that is faster than the speed of the inside wheel. This causes the driven clutch for the outside wheel to turn faster than the speed of the bevel gear. The movement of one wheel faster than the movement of another wheel begins the clutch action of the NoSPIN differential.The cam for the driven clutch of the inside wheel has teeth. The teeth are engaged with the teeth of center cam (15). The teeth stay in the same position in relation to spider (17). The teeth of the inside drive clutch are engaged with the spider. The teeth on the other side of center cam (15) are used as ramps. The cam for the driven clutch of the outside wheel has teeth. The teeth move up the teeth of the center cam (15). This causes the outside driven clutch to move away from the spider and away from the center cam (15). The outside driven clutch is not engaged with the spider.The driven clutch for the outside wheel cannot engage with the spider until the outside axle shaft slows to the lower speed of the bevel gear. The holdout ring prevents the
Caterpillar parts catalog:
Parts mount Caterpillar catalog:
2W8603
MOUNT-FLEXIBLE
3116, 3126, 3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3412D, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3606, 3608, 3612, 3616, C15, C9, G3304, G3306, G3306B, G...
3116, 3126, 3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3412D, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3606, 3608, 3612, 3616, C15, C9, G3304, G3306, G3306B, G...
8C5607
MOUNT-ISOLATION
120H, 120M, 120M 2, 12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 163H NA, 16H, 16M, 2384C, 2484C, 24H,...
120H, 120M, 120M 2, 12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 163H NA, 16H, 16M, 2384C, 2484C, 24H,...
9W9930
MOUNT AS
14M, 16M, 24H, 24M, 3126B, 3176B, 3176C, 3196, 3306, 3306B, 3406B, 3406C, 3406E, 3412C, 3456, 517, 525D, 527, 533, 535D, 543, 545D, 555D, 561M, 561N, 611, 613C II, 613G, 615C, 621B, 621F, 621G, 621H, ...
14M, 16M, 24H, 24M, 3126B, 3176B, 3176C, 3196, 3306, 3306B, 3406B, 3406C, 3406E, 3412C, 3456, 517, 525D, 527, 533, 535D, 543, 545D, 555D, 561M, 561N, 611, 613C II, 613G, 615C, 621B, 621F, 621G, 621H, ...
3N5611
MOUNT AS
3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, C27, C32, C9, G3304, G3306, G3306B, G3406, G3408, G3408B, G3408C, G3412, ...
3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, C27, C32, C9, G3304, G3306, G3306B, G3406, G3408, G3408B, G3408C, G3412, ...
9X6895
MOUNT
3406B, 3408B, 3408C, 3412, 3412C, PM3412, SCT673, SPS342, SPT342
3406B, 3408B, 3408C, 3412, 3412C, PM3412, SCT673, SPS342, SPT342
1533412
MOUNT AS
3412, 3412C, C27, G3412, TH48-E70
3412, 3412C, C27, G3412, TH48-E70
9X9896
MOUNT
120K, 120K 2, 12K, 140K, 140K 2, 160K, 2384C, 2470C, 2484C, 2570C, 2670C, 2864C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
120K, 120K 2, 12K, 140K, 140K 2, 160K, 2384C, 2470C, 2484C, 2570C, 2670C, 2864C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
1550930
MOUNT AS
3412, 3412C
3412, 3412C
1533412
MOUNT AS
3412, 3412C, C27, G3412, TH48-E70
3412, 3412C, C27, G3412, TH48-E70
1017546
MOUNT
3.4B IOPU, 3054, 3054B, 3054C, 3054E, 3056, 3056E, C3.4B, C4.4, C4.4XQ100, C4.4XQ80, C6.6, C7.1, SPF343C
3.4B IOPU, 3054, 3054B, 3054C, 3054E, 3056, 3056E, C3.4B, C4.4, C4.4XQ100, C4.4XQ80, C6.6, C7.1, SPF343C
3174956
MOUNT-FLEXIBLE
C6.6, C9
C6.6, C9
2544235
MOUNT
3406C, 3456, C13, C15, C15 I6, C18, C18 I6, C6.6, C7.1, C9
3406C, 3456, C13, C15, C15 I6, C18, C18 I6, C6.6, C7.1, C9
2414629
MOUNT AS-RESILIENT
3406C, 3456, C13, C15, C15 I6, C18, C18 I6, C6.6, C7.1, C9
3406C, 3456, C13, C15, C15 I6, C18, C18 I6, C6.6, C7.1, C9
2493108
MOUNT-ISOLATION
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C175-20, C27, C32, G3516H, PM3516, PMG3516
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C175-20, C27, C32, G3516H, PM3516, PMG3516
3817310
MOUNT-FLEXIBLE
3608, C280-8
3608, C280-8
2059470
MOUNT-FLEXIBLE
3512B, 3512C, 3516B, 3516C, C175-16, C280-12, C280-16, C280-6, C280-8, G3512E, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516, TH35-C11I
3512B, 3512C, 3516B, 3516C, C175-16, C280-12, C280-16, C280-6, C280-8, G3512E, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516, TH35-C11I
1747912
MOUNT-FLEXIBLE
C18, RM-350B, SM-350
C18, RM-350B, SM-350
2457598
MOUNT AS
3126B, C-9, C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C9I, CX35-P800, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15I, TH48-E70
3126B, C-9, C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C9I, CX35-P800, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15I, TH48-E70
1832245
MOUNT AS
3412C
3412C