MOUNT AS 1612183 - Caterpillar

Illustration 1 g03773196
Table 1
Specification for 368-3247 Stick Cylinder Gp
Item Qty Part Specification Description
1 2 147-5838 Bushing Bore before assembly is 90.27 0.02 mm (3.554 0.001 inch).
Installation depth is 9.5 0.3 mm (0.37 0.01 inch).
A 1 368-3271 Stick Cylinder As Bore is 110.06 0.04 mm (4.333 0.002 inch).
B 1 368-6820 Cylinder Rod and Bearing As Diameter is 79.93 0.03 mm (3.147 0.001 inch).
2 8 7Y-5216 Bolt Torque to 530 40 N m (391 30 lb ft).
C 1 374-5162 Head Bore is 80.53 0.03 mm (3.170 0.001 inch).
3 1 114-0755 Bushing Outside diameter before assembly is 85.133 0.033 mm (3.3517 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
4 1 170-9843 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
5 1 170-9859 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
6 1 165-9285 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
7 - - Before assembly, apply white Loctite 603 to the wiper seal groove.
8 1 340-8345 Stop Free linear movement of the stop after assembly is 0.50 0.26 mm (0.020 0.010 inch).
9 2 8T-4241 Retaining Ring Maximum outside diameter of the retaining rings after assembly is 54.2 mm (2.13 inch).
10 1 143-8150 Special Locknut Before assembly, lubricate the face and the threads with 309-6932 Hydraulic Oil.
Torque to 4500 230 N m (3319 170 lb ft).
11 2 147-5819 Ring Lubricate the inside diameter and the outside diameter with clean grease.
12 1 9X-7301 Seal As Lubricate the inside diameter and the outside diameter with clean grease.
13 1 143-8034 Ring Lubricate the inside diameter and the outside diameter with clean grease.
14 1 143-8031 Ring Lubricate the inside diameter and the outside diameter with clean grease.
15 1 103-8341 Seal Ring The slit of the seal ring must turn in the direction of the piston.