MOUNT 2461317 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7615 Pin As 1
4C-6486 Stand 1
8S-7641 Tube 1
8S-8048 Saddle 1
B 350-7768 Electric Hydraulic Pump Gp
350-7769(1) Electric Hydraulic Pump Gp 1
6V-0113 Double Acting Cylinder
9U-5346 Nut
287-2153 Sleeve
137-8460 Puller Stud
C 1U-9202 Lever Puller Hoist Gp 1
(1) CE CompliantReference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.Start By:
Remove the stick.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Lower the boom to the ground. Release the system hydraulic pressure.
Lower the boom to the ground. Release the system hydraulic pressure.
Illustration 1 g06236311
Illustration 2 g06236312
Illustration 3 g06236694
Illustration 4 g06236793
Illustration 5 g06236842
Illustration 6 g06236846Installation Procedure
Install boom in the reverse order of removal.