MOUNT 3445894 - Caterpillar

Illustration 1 g00813634
(1) Torque for 4I-7527 Breather Assembly ... 45 4.5 N m (33 3 lb ft) (2) Torque for 7Y-1115 Gauge Tube ... 60 6 N m (45 4 lb ft) (3) Apply 1U-8846 Gasket Sealant to the flange surface of the cover and to the gear housing. (4) Torque for 6V-7238 Shutoff Valve ... 50 7 N m (37 5 lb ft) (5) Torque for the 6V-7238 Shutoff Valve at closing ... 6 3 N m (53 27 lb in) (6) Apply 5P-3931 Anti-Seize Compound to the surfaces in contact with 136-2904 Bearing and 136-2940 Bearing.After installation, make stake marks near the opening of each pin hole. Refer to Detail A. (7) Location of the stake marks A ... 2.25 .75 mm (.09 .03 inch) B ... 2.25 .75 mm (.09 .03 inch) C ... 2.25 .75 mm (.09 .03 inch) D ... 2.25 .75 mm (.09 .03 inch) (8) Lubricate the sealing lip lightly with the lubricant that is being sealed. When you insert the 135-9044 Seal into the cage, lubricate the outside of the seal with grease.
Illustration 2 g00834170
(9) Torque for 5D-1026 Hose Clamp ... 4.5 0.5 N m (40 4 lb in) (10) Apply 5P-3931 Anti-Seize Compound to the pin. (11) Apply 1U-8846 Gasket Maker to the surface of the swing drive in contact with the upper frame.