MOUNT AS 4817979 - Caterpillar

Illustration 24 g01299400
Attach a suitable lifting device to load cylinder (27). The weight of load cylinder (27) is approximately 204 kg (450 lb). Use the suitable lifting device to carefully position load cylinder (27) in the machine.
Illustration 25 g01299359
Reposition pin (28) to the original location.
Illustration 26 g01299306
Position retainer (25) and plate (26). Install bolts (24). Connect grease hose assembly (23) .
Illustration 27 g01299161
Install retainer (21) and bolts (20). Connect grease hose assembly (22) .
Illustration 28 g01299092
Illustration 29 g01304243
Attach a suitable lifting device to link assembly (17). The weight of link assembly (17) is approximately 204 kg (450 lb). Remove the suitable holding device and position link assembly (17) .
Install thrust washers (19) (not shown) to the original locations. Install pin (18) .
Illustration 30 g01299088
Position bracket (14) and cylinder (16). Install bolts (13) and nut (15). Tighten nut (15) to a torque of 245 30 N m (181 22 lb ft).
Illustration 31 g01299086
Install retainer (12) and bolts (11). Connect grease hose assembly (10) .
Illustration 32 g01299085
Install retainer (9) and bolts (8). Connect grease hose assembly (7) .
Illustration 33 g01299083
Illustration 34 g01299084
Connect both ends of tube assembly (5). Connect hose assembly (6) .
Illustration 35 g01299077
Connect hose assemblies (3) and bracket assembly (4) .
Illustration 36 g01299055
Remove the suitable blocking from both sides of the machine.
Illustration 37 g01299053
Illustration 38 g01299054
Remove Tooling (A) and Tooling (B) from the machine.