MOUNT AS 9W9941 - Caterpillar

The Menu
Access the Menu
Illustration 1 g02508636
The menu can be accessed from one of the following two places:
Press the "Home" button. The menu is available using softkey number 1.
Press and hold the "Home" button for 1 second.Menu Selections
Active Station
Illustration 2 g02508657
The "Active Station" is used when there are multiple RP410 stations in the installation. Press the "Active Station" icon to access the "Active Station" dialog.Camera
An IP camera can be connected to the Ethernet network. The image will be displayed on the RP410 screen.Up to four cameras can be connected to one RP410 screen. All four images can be displayed simultaneously or just one full screen image.Note: The image update rate is 4 to 5 frames per second.Expand to Full Screen
Touch one of the four camera images to expand to full screen view for that camera.Reduce to one-fourth of the Screen
Touch anywhere on the full-size image to reduce the image to one-fourth of the screen size.Backlight
Select between different screen backlight settings.
10 percent backlight is as dark as can be
50 percent backlight is half full
100 percent backlight is fully lit
Automatic varies between 10 percent and 100 percent using an ambient light detector.
Night mode is the same as automatic. The difference is that night mode will turn the screen completely off 10 seconds after no action has taken place. The screen will awake if any alarm occurs or due to user input. The screen will stay lit as long as there are unacknowledged alarms.Generator
Illustration 3 g02508677
If the DCU engine panel is reading generator parameters from the RIO 425, then the generator image and values will be displayed here.Refer to the following list for the displayed values:
Individual phase currents
Phase-Phase voltages
Phase-Neutral voltages
Frequency (Hz)
Total power (kW)
Cosinus (decimal value)Languages
Illustration 4 g02508696
Select the desired RP410 operator language.Note: The instruments text description resides in the DCU, and must be translated for each language during installation of the DCU.If a language is selected where there is no translation, the default language will be used.Counters
The counters page displays engine running hours for all the engines.Information
Illustration 5 g02508756
The counters page displays IP addresses and revision numbers.The DCU section displays the IP address of the connected engine panels.Configuration
The configuration menu selection leads to the user configuration submenu section. The configuration menu is not password protected.Configuration Selections
Wallpaper
Illustration 6 g02508796
The wallpaper is the background image for the instrument screens.Predefined Wallpapers
Select appropriate background wallpaper from the selection of available wallpapers.Up to eight wallpaper backgrounds may come with the unit.Personal Wallpaper
Personal wallpaper can be uploaded using the web interface.
Connect a standard Ethernet cable between the RP410 and your PC.
In the PC browser, type the IP address of the RP410, as found in the RP410 submenu.
Select "Upload Wallpaper".
Using the "Browse" button, select a picture file from your PC in PNG format. Select the size 640x416 pixels. Maximum file size is 1MB.
Select the "Upload" button.Button Beep
The button beep selection allows the user to decided whether a button press and a tap on the touch screen should activate the buzzer.The function toggles on/off.Sound Configuration
The RP410 has a pair of speakers and a buzzer built-in. Use