MOUNT AS 9X7438 - Caterpillar

Engine:
3606 (S/N: 8RB)
3608 (S/N: 6MC)
3612 (S/N: 9RC; 9FR; 2NZ)
3616 (S/N: 1PD; 1FN)
3618 (S/N: 2MW)
Reference: See Operation and Maintenance Manual, SEBU7632, "Monitors For 3600 Diesel Monitoring Systems".The touchscreen of the 203-7810 Engine Monitoring Control Gp and the 203-7811 Engine Monitoring Control Gp may need to be calibrated after installation and at periodic intervals during the life of the monitor.Only the "administrator" can access the utility that is used to calibrate the touchscreen. Normally, "operator" is used as the log on when the monitor is run. In order to calibrate the touchscreen, a keyboard must be installed. "Administrator" must be used as the log on. Hold down the "Shift" key while the computer is starting in order to access the log on screen. When the log on screen is available, enter "administrator" as the user id. The password for the "administrator" was set when the monitor was installed.Note: The instructions for installing the computer recommend using "3600" as the password for the "administrator".After the "administrator" is logged in, make the following selections:
"Start Menu"
"Settings"
"Control Panel"
"Elo Touchscreen"
"Calibrate"Follow the instructions that appear on the monitor.After the touchscreen has been calibrated, log the "administrator" off the computer. Log the "operator" onto the computer. Restart the computer.