MOUNTING GP-PUMP 2281763 - Caterpillar

Illustration 1 g06048572
Table 1
Specification for 449-6527 Stick
Item Qty Part Specification Description
All bores must be free of paint. Coat all bores for the pins with lubricant including the stick, the upper frame, and the cylinder pin bores.
1 1 395-8566 Nut Use wrench to tightening the nut for an additional 6 to 10 degrees.
2 1 458-4613 Pin As Diameter is 129.87 to 130.00 mm (5.113 to 5.118 inch).
3 1 395-8138 Pin Diameter is 119.87 to 120.00 mm (4.719 to 4.724 inch).
4 As required, use the following shim to adjust a maximum lateral clearance of 0.8 mm (0.03 inch).
1 093-0076 Shim Thickness is 1.0 mm (0.04 inch).
1 151-0653 Shim Thickness is 0.5 mm (0.02 inch).
5 As required, use the following shim to adjust a maximum lateral clearance of 1.0 mm (0.04 inch).
1 093-0106 Shim Thickness is 2.0 mm (0.08 inch).
1 093-0074 Shim Thickness is 1.0 mm (0.04 inch).
6 2 449-6436 Bushing Bore before assembly is 130.36 0.04 mm (5.132 0.002 inch).
7 2 449-6541 Bushing Bore before assembly is 120.14 0.04 mm (4.730 0.002 inch).
8 2 449-6543 Bushing Bore before assembly is 80.125 0.04 mm (3.1545 0.0016 inch).