MOUNTING GP-CAB 2333206 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-2082 Lifting Hook 1
Illustration 1 g01328665
Attach Tooling (A) and a suitable lifting device to main hydraulic pump (35). The weight of main hydraulic pump (35) is approximately 130 kg (287 lb). Install main hydraulic pump (35) and bolts (34).
Illustration 2 g01328664
Connect hose assemblies (28), (29), (30), (31), and (32).
Illustration 3 g01328663
Connect hose assemblies (23), (24), (25), (26), and (27).
Illustration 4 g01328661
Position harness assemblies (22) and install clip (21). Connect harness assembly (20). Install cable straps (18) and (19).
Illustration 5 g01328660
Connect harness assemblies (16) and (17).
Illustration 6 g01328695
Position solenoid valve (4) and connect hose assembly (15). Connect harness assembly (14). Install cable strap (13).
Illustration 7 g01328648
Illustration 8 g01328647
Install bolts (12) and plate (11). Install bolts (10).
Illustration 9 g01328642
Install bottom guard (9).
Illustration 10 g01328626
Install plate (7). Install bolts (8).
Illustration 11 g01328624
Install plate (6) and bolts (5). Position solenoid valve (4) and install bolts (3).
Illustration 12 g01328630
Close the right side access door (2).
Illustration 13 g01328634
Install brackets (1).
Fill the hydraulic oil system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change". End By:
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".