MOUNTING GP 2336371 - Caterpillar

Installation Procedure
Illustration 1 g00537170
Attach a hoist to the engine front support. Install the engine front support onto the cradles on the side rails of the frame. The weight of the engine front support is approximately 260 kg (573 lb).
Install sleeve (16) on the engine front support. Install two mount assemblies (15) .
Illustration 2 g00537168
Install the washers, the nuts, and the two bolts that connect engine front support (14) to the frame.
Illustration 3 g00537167
Attach a suitable lifting device to the front engine lifting eye. Lower the front of the engine onto the engine front support. The weight of the engine is approximately 8875 kg (19566 lb). Install the bolts (13) and the bracket.
The bracket must be installed before the truck is returned to service. The turbochargers could be damaged if the truck is returned to service before the installation of the bracket.
Illustration 4 g00537166
Install the fitting on the bracket. Connect hose assembly (12) to the bracket.
Illustration 5 g00537165
Install the washers, the nuts, and bolts (11) that fasten the trunnion to the engine front support.
Illustration 6 g00537164
Tighten the clamps on two hoses (10) .
Illustration 7 g00537163
Tighten the clamps on hose (9) .
Illustration 8 g00537161
Tighten the clamps on hose (8) .
Illustration 9 g00537160
Install the bolts that hold electrical box (7) to the engine front support.
Connect ground strap (6) to the engine front support.
Install the four hose assemblies (5). There are two hoses (5) for each hose (4) .
Move two hoses (4) upward. Tighten the clamps.
Illustration 10 g00537159
Install tube (3) .
Illustration 11 g00537157
Install bracket (2) of the fan guard.
Install tubes (1). Tighten the hose clamps.
Fill the system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct capacities and for the correct procedures.End By: Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".