AVSPARE.COM
parts catalog

MOUNTING GP-GENERATOR 2444057 - Caterpillar


2444057 MOUNTING GP-GENERATOR Caterpillar parts 3516, 3516B
Rating:
79
Alternative (cross code) number:
CA2444057
244-4057
2444057
Caterpillar 2444057 MOUNTING GP-GENERATOR

Buy MOUNTING GP-GENERATOR 2444057 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 2444057:

GENERATOR SET  3516   3516B   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 12 g00712122
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install inner spring (22) .
Install outer spring (23) .
Illustration 13 g00712119
Install packing (3) in plug (8) .
Illustration 14 g00712118
Install cap (2) on plug (8) .
Install new O-ring seal (11) on plug (8) .
Illustration 15 g00712111
Install pushrod (16) in plug (8) .
Install piston (18) on pushrod (16) .
Illustration 16 g00712108
Install plug (8) and the pushrod in the body assembly.
Repeat Steps 5 through 20 in order to install the other three spool assemblies.
Illustration 17 g00712106
Install cover (25) .
Install bolts (26). Tighten the bolts to a torque of 29 3 N m (21 2 lb ft).
Illustration 18 g00712244
Install bushings (20) in covers (24) .
Illustration 19 g00712105
Install covers (24) .
Install bolts (4). Tighten the bolts to a torque of 79 10 N m (58 7 lb ft).
Illustration 20 g00711978
Install setscrews (5). Install nuts (17) .
Illustration 21 g00711976
Install pedal (12) on the pilot valve.
Illustration 22 g00711974
Install camshaft (19) in the pedal. Center camshaft (19) in pedal (12) .
Install setscrew (6) in the pedal. Tighten the setscrew to a torque of 6.9 1.0 N m (61 9 lb in).
Tighten nuts (17) to a torque of 33 3 N m (24 2 lb ft).
Repeat Steps 27 through 30 in order to install the other pedal.
Illustration 23 g00711962
Install new O-ring seals (38) on hydraulic fittings (37) .
Install new O-ring seals (39) on hydraulic fittings (37) .
Illustration 24 g00977678
Install hydraulic fittings (37) on the pilot valve.End By: Install the pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Travel) - Install" in this manual.


Parts mounting Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.