MOUNTING GP-TRUCK BODY 2828997 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-3527     Valve Spring Compressor     1    Start By:
Remove the cylinder head.
Illustration 1 g03356660
Remove valve stem caps (1). Using Tooling (A), compress valve springs (4). Remove valve keepers (2). Release Tooling (A). Remove valve spring retainers (3) valve springs (4) and valve seals (5). Remove inlet and exhaust valves (6). Note: Mark the valves so that they can be reinstalled in the same location.Installation Procedure
Illustration 2 g03384994
Illustration 3 g03385007
Place new valve seals (5) onto valve guides (7). Note: Intake valve seals have white seal springs. Exhaust valve seals have black seal springs.
Install valve seals (5) to a height on dimension (8) to 10.9 to 11.2 mm (0.430 to 0.440 inch) from the cylinder head.
Illustration 4 g03356749
Note: Install valves in the original location.
After thorough inspection and replacement of parts, assemble inlet and exhaust valves (6) into the cylinder head.
Illustration 5 g03385072
Install valve springs (4) and valve spring retainers (3). Use Tooling (A) to compress valve springs (4). Install valve keepers (2). Release Tooling (A). Install valve stem caps (1) .End By: Install the cylinder head.