MOUNTING 2G1769 - Caterpillar

Industrial Engine:
C18 (S/N: WJH1-UP; WRH1-UP)
Engine News SEBD9793, 13 July 2012, "New Engine Control Software Is Available for Certain LRC C18 Industrial Engines". Disregard the previous article, part Numbers have been removed. Refer to the article that follows.The new software has an improved calibration that reduces engine oil degradation. The new software is a direct replacement for the existing software on C18 Industrial Engines that are located in Lesser Regulated Countries. This change is adaptable back to first on the serial numbers listed above. Refer to Table 1 for a list of the new and former part numbers.Refer to the procedure below for ordering a new emissions label, removing the existing, and installing the new label.
Table 1
Software Part Number     Former Part Numbers    
365-6497 (700 hp)     296-2721    Note: The 700 hp rating is only for engines that use a standard flash file.Note: Any engines that are updated with the new PSO software must stay in that geographic region.Rework Procedure
Begin at the SIS web home page. The address is: https://sis.cat.com
From the SIS web home page, select the "Engine Technical Marketing Information (TMI)" link.
Once in TMI, input the serial number of the engine into the reference number box and select "Serial Number" in the drop-down menu.
Press the "Retrieve Data" button.
Illustration 1 g03106037
Select the "Emissions Data" link.
Scroll to the bottom and click the link titled, "Need emissions replacement label-Click Here!". This link will direct the user to the Large Power Systems Division Home page.
Illustration 2 g03106057
Click on the "Emissions/Certification Replacement" link.
Illustration 3 g03106077
Complete the dealer name and address information.
Complete the remaining fields highlighted with a red asterisk.
Illustration 4 g03106096
Select "Both Certification and Information Labels" as the label type. Enter the number of this Engine News article in the field titled "Reason for the replacement label request". The engine serial number field must be completed with the correct information.Note: Multiple engines can be entered in "Block 6".
Illustration 5 g03106101
Note: Be sure that the correct shipping information is provided. International requests must have a valid UPS or DHL account number.Note: You will be sent two labels when you place the On-line order for the Engine Information Label. The Engine Information Label and the Serial Number Plate must both be installed as directed in the rework procedure. If you do not receive the Engine Information Label and the Serial Number Plate contact:Global_Engine_Marking
Remove the original adhesive label. Properly clean the area, and replace the original with the new label and clear overlay.
Destroy the old label.Note: Any engines that are updated with the new PSO software must stay in that geographic region.