MOUNTING GP-ROLLER FRAME 3807432 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     FT-1114     Vacuum Cap     1    
B     FT-2790     Socket Assembly     1    
214-6621 Socket     1    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00996297
Install charge pump (6). Install bolts (5) with Tooling (B). Position bracket (4) and install bolts (3) .
Illustration 2 g00996294
Install bolts (2). Connect hose assemblies (1) .
Illustration 3 g00918914
Remove Tooling (A) from the hydraulic tank.
Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".End By: Install the fuel tank on the left side of the machine. Refer to Disassembly and Assembly, "Fuel Tank (Left Side) - Install".