MOUNTING GP-HYD PUMP DRIVE 3N4119 - Caterpillar

3N4119 MOUNTING GP-HYD PUMP DRIVE Caterpillar parts 3304, 3306

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3N4119
3N-4119
3N4119

Caterpillar 3N4119 MOUNTING GP-HYD PUMP DRIVE

Weight: 27 pounds 12 kg.

Buy MOUNTING GP-HYD PUMP DRIVE 3N4119 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, INDUSTRIAL ENGINE,

Compatible equipment models: 3N4119:

GEN SET ENGINE 3304

INDUSTRIAL ENGINE 3306 Caterpillar

Number on catalog scheme:

Caterpillar 3N4119 Parts scheme MOUNTING GP-HYD PUMP DRIVE

For full view, you need register

Information:

Illustration 10 g02674622
Remove bolt (24) and pin assembly (23). Reposition cylinder assembly (22) out of the way.
Illustration 11 g02674623
Illustration 12 g02674624
Attach Tooling (A) and a suitable lifting device to cowling assembly (25). The weight of cowling assembly (25) is approximately 23 kg (50 lb).
Remove bolts (26) and cowling assembly (25) .
Illustration 13 g02674625
Disconnect clip (29) .
Attach Tooling (A) and a suitable lifting device to support assembly (28). The weight of support assembly (28) is approximately 36 kg (80 lb).
Remove supports (27) .
Remove bolts (30) and bolts (31) and support assembly (28) .
Illustration 14 g02674626
Disconnect clips (32) and harness assembly (33) .
Illustration 15 g02674627
Remove bracket (34) .
Illustration 16 g02674629
Attach Tooling (B) and a suitable lifting device to support assembly (35). The weight of support assembly (35) is approximately 50 kg (110 lb).
Remove bolts (36) and support assembly (35) .
Illustration 17 g02675556
Disconnect hoses (37), (38), and (39). Remove cover assembly (40) .
Illustration 18 g02675558
Disconnect clips (41) and harness assembly (42). Disconnect hose assemblies (43) .
Illustration 19 g02675559
Disconnect hoses (44) and (45) .
Illustration 20 g02675576
Remove tube assemblies (46) .
Illustration 21 g02675577
Illustration 22 g02675578
Attach a suitable lifting device to cooling system package (47). The weight of cooling system package (47) is approximately 290 kg (640 lb).
Remove bolts (48). Repeat for the opposite side of cooling system package (47) .
Illustration 23 g02675579
Position cooling system package (47) onto suitable cribbing.Installation Procedure
Install cooling system package (47) in the reverse order of removal.
Tighten bolts (17) and (18) to a torque of 30 7 N m (266 62 lb in).
Tighten bolts (7), (5), and (2) to a torque of 15 3 N m (133 27 lb in).