MOUNTING GP-JACKET WTR HEATER 4302766 - Caterpillar

Table 1
Effectivity    
Model     Adaptable To Machines     Effective With Machines    
770     S/N:BZZ1-498     S/N:BZZ499-UP    
772     S/N:RLB1-552     S/N:RLB553-UP    Parts Needed for Rework
Table 2
Parts List    
Item     Quantity     Part Number     Part Name    
1     1     330-1752     Handhold (stop) (1)    
2     2     8T-4195     Bolt    
3     2     8T-4121     Hard Washer    
4     2     8T-4133     Nut    
( 1 ) This part is used for multiple applications. Instructions for Rework
Illustration 1 g01947174
This view shows an illustration of the finished rework from the rear of the cab looking forward to the front of the cab. The instructions for cutting slots and drilling holes will follow. (1) 330-1752 Handhold (stop) (2) 8T-4195 Bolt (3) 8T-4121 Hard Washer (4) 8T-4133 Nut out of the view and under the rail (5) Panel assembly (6) Rear wall
Illustration 2 g01947206
Dimensions for cutting slots on rear panel (A) 77 mm (3.0 inch) (B) 36 mm (1.4 inch) (C) 203.5 mm (8.0 inch) (D) 15.5 mm (0.6 inch)
Illustration 3 g01947224
Rear panel with slots (E) Slots
Use the dimensions in Illustration 2 to cut two slots (E) into rear panel (5) .
Illustration 4 g01947235
Top ledge of rear wall (G) 240 mm (9.4 inch) (H) 49.7 mm (2.0 inch) (J) 15.9 mm (0.6 inch) (K) 13.5 mm (0.5 inch) diameter value for the holes
Drill two 13.5 mm (0.5 inch) holes (K) on the top ledge of the rear wall (6). The location for the holes is shown in Illustration 4.
Secure the stop (1) to the rear wall (6). Use illustration 1 as a reference to finish the assembly of the stop.