MOUNTING GP-GUARD 4598157 - Caterpillar

Illustration 8 g00122886
Inspect the cooling system for any leaks, for faulty hoses and for any trash buildup. Correct any leaks. Remove any trash from the radiator.
Illustration 9 g00705974
Inspect all of the belts for the engine attachments. Replace any belts that are worn, frayed, or broken.
Illustration 10 g00706013
Inspect the hydraulic system for leaks. Inspect the tank, the cylinder rod seals, the hoses, the tubes, the plugs, the connecting joints, and the fittings. Correct any leaks in the hydraulic system.
Illustration 11 g00122889
Inspect the spindle bearing housings for the front wheel for leaks. If a leak is found consult your Caterpillar dealer for an inspection of the spindle bearing housings for the front wheel. If necessary, make repairs to the spindle bearing housings for the front wheel.
Illustration 12 g00706014
Inspect the circle drive for leaks. Repair any leaks in the circle drive.
Illustration 13 g00122891
Inspect the differential and the tandems for leaks. Make any necessary repairs.
Illustration 14 g00122892
Inspect the tires for any damage and for proper inflation. Replace any missing valve caps.
Illustration 15 g00122893
Inspect the transmission for leaks. Make any necessary repairs.
Illustration 16 g00706128
Make sure that all covers and guards are securely attached. Inspect the covers and the guards for damage.
Illustration 17 g00706130
Inspect the steps, the walkways, and the handholds. Clean the steps, the walkways, and the handholds. Make any necessary repairs. Inspect the Rollover Protective Structure (ROPS) for damage. If repair is necessary, consult your Caterpillar dealer. Tighten any loose ROPS bolts.
Illustration 18 g00706133
Inspect the operator compartment for trash buildup. Inspect the area under the floorplate for trash buildup. Inspect the top of the crankcase guard for trash buildup. Keep these areas clean.
Illustration 19 g00108033
Illustration 20 g00682619
Clean the recirculation filters. The filters are located inside the cab. Two filters are located above the doors and a filter is located behind the seat. There are a total of three filters.
Illustration 21 g00715704
Check the drain tubes on the evaporator. The drain plug should not be obstructed. The drain tubes are located underneath the cab on the right side of the machine and on the left side of the machine.
Illustration 22 g00715709
Inspect the accumulator. The accumulator is located underneath the machine on the right side. The accumulator is below the rear ROPS. Start the machine. Set the air conditioner on HIGH. Feel the accumulator with your hands. The accumulator should be cool or cold to the touch.